lkml.org 
[lkml]   [2017]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/3 v2] usb: dwc2: Improve gadget state disconnection handling
Date
On 10/24/2017 1:33 AM, John Stultz wrote:
> In the earlier commit dad3f793f20f ("usb: dwc2: Make sure we
> disconnect the gadget state"), I was trying to fix up the
> fact that we somehow weren't disconnecting the gadget state,
> so that when the OTG port was plugged in the second time we
> would get warnings about the state tracking being wrong.
>
> (This seems to be due to a quirk of the HiKey board where
> we do not ever get any otg interrupts, particularly the session
> end detected signal. Instead we only see status change
> interrupt.)
>
> The fix there was somewhat simple, as it just made sure to
> call dwc2_hsotg_disconnect() before we connected things up
> in OTG mode, ensuring the state handling didn't throw errors.
>
> But in looking at a different issue I was seeing with UDC
> state handling, I realized that it would be much better
> to call dwc2_hsotg_disconnect when we get the state change
> signal moving to host mode.
>
> Thus, this patch removes the earlier disconnect call I added
> and moves it (and the needed locking) to the host mode
> transition.
>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Guodong Xu <guodong.xu@linaro.org>
> Cc: Amit Pundir <amit.pundir@linaro.org>
> Cc: YongQin Liu <yongqin.liu@linaro.org>
> Cc: John Youn <johnyoun@synopsys.com>
> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
> Cc: Douglas Anderson <dianders@chromium.org>
> Cc: Chen Yu <chenyu56@huawei.com>
> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
> v2: Remove the extra dwc2_hsotg_core_init_disconnected() call
> I had added, as suggested by Minas.
> ---
> drivers/usb/dwc2/hcd.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index c263114..9bd60ec 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -3277,7 +3277,6 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
> dwc2_core_init(hsotg, false);
> dwc2_enable_global_interrupts(hsotg);
> spin_lock_irqsave(&hsotg->lock, flags);
> - dwc2_hsotg_disconnect(hsotg);
> dwc2_hsotg_core_init_disconnected(hsotg, false);
> spin_unlock_irqrestore(&hsotg->lock, flags);
> dwc2_hsotg_core_connect(hsotg);
> @@ -3296,8 +3295,12 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
> if (count > 250)
> dev_err(hsotg->dev,
> "Connection id status change timed out\n");
> - hsotg->op_state = OTG_STATE_A_HOST;
>
> + spin_lock_irqsave(&hsotg->lock, flags);
> + dwc2_hsotg_disconnect(hsotg);
> + spin_unlock_irqrestore(&hsotg->lock, flags);
> +
> + hsotg->op_state = OTG_STATE_A_HOST;
> /* Initialize the Core for Host mode */
> dwc2_core_init(hsotg, false);
> dwc2_enable_global_interrupts(hsotg);
>

This patch is required for the HiKey platform, because the assertion of
the "Connector ID status change" interrupt is different: asserting on B
connector unplug and goes to Host mode.
No any side effect on SNPS HAPS-DX platform where ConnIDStsChng
assertion is correct.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Tested-by: Minas Harutyunyan <hminas@synopsys.com>

Thanks,
Minas

\
 
 \ /
  Last update: 2017-10-24 11:01    [W:0.067 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site