lkml.org 
[lkml]   [2017]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] Documentation: dt: extcon: add optional debounce-timeout-ms attribute
On 2017년 10월 19일 12:25, Raveendra Padasalagi wrote:
> Add documentation on optional dt attribute "debounce-timeout-ms"
> in extcon node to capture user specified timeout value for id
> and vbus gpio detection.
>
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
> ---
>
> Changes in v2:
> Rename debounce-timeout-ms to input-debounce
>
> Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> index dfc14f7..d115900 100644
> --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> @@ -10,6 +10,9 @@ Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
> - id-gpio: gpio for USB ID pin. See gpio binding.
> - vbus-gpio: gpio for USB VBUS pin.
>
> +Optional properties:
> +- input-debounce: debounce timeout value for id and vbus gpio in microseconds.

The pinctrl-bindings.txt[1] specify the unit of 'input-debounce'.
The unit is usec instead of 'microsecond'. You need to modify the description of unit.
[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

> +
> Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
> extcon_usb1 {
> compatible = "linux,extcon-usb-gpio";
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2017-10-22 17:20    [W:0.071 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site