Messages in this thread | | | Subject | Re: [3/3] ARM: da850: Add ti, da830-uart compatible for serial ports | From | Sekhar Nori <> | Date | Mon, 2 Jan 2017 13:36:40 +0530 |
| |
On Thursday 22 December 2016 09:36 PM, Franklin S Cooper Jr wrote: > > > On 12/20/2016 02:23 PM, David Lechner wrote: >> TI DA8xx/OMAPL13x/AM17xx/AM18xx SoCs have extra UART registers beyond > > Similar comment about adding Keystone SoCs to the list of SoCs. > >> the standard 8250 registers, so we need a new compatible string to >> indicate this. Also, at least one of these registers uses the full 32 >> bits, so we need to specify reg-io-width in addition to reg-shift. >> >> "ns16550a" is left in the compatible specification since it does work >> as long as the bootloader configures the SoC UART power management >> registers. >> >> Signed-off-by: David Lechner <david@lechnology.com> >> --- >> arch/arm/boot/dts/da850.dtsi | 9 ++++++--- > > Similar changes should be made to the various Keystone dtsi files.
That will be a different patch though since the two changes will go through different trees. And I strongly suspect David does not have access to a keystone board. So it will have to be done by someone at TI.
Thanks, Sekhar
| |