lkml.org 
[lkml]   [2016]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/15] hisi_sas: keep CHL_INT2 masked for v2 HW
Date
None of the CHL_INT2 interrupts are serviced
in the channel irq ISR, so leave the interrupt
source masked.
The interrupt mask is initially set in
init_reg_v2_hw().

Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 6 ------
1 file changed, 6 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e0c124b..25e7c58 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -965,14 +965,8 @@ static void start_phys_v2_hw(unsigned long data)

static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
{
- int i;
struct timer_list *timer = &hisi_hba->timer;

- for (i = 0; i < hisi_hba->n_phy; i++) {
- hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x6a);
- hisi_sas_phy_read32(hisi_hba, i, CHL_INT2_MSK);
- }
-
setup_timer(timer, start_phys_v2_hw, (unsigned long)hisi_hba);
mod_timer(timer, jiffies + HZ);
}
--
1.9.1
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.125 / U:2.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site