lkml.org 
[lkml]   [2016]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH] usb: dwc2: Add reset control to dwc2
From
Date
On 7/6/2016 9:25 AM, Philipp Zabel wrote:
> Hi Dinh,
>
> Am Dienstag, den 21.06.2016, 14:12 -0500 schrieb
> dinguyen@opensource.altera.com:
>> From: Dinh Nguyen <dinguyen@opensource.altera.com>
>>
>> Allow for platforms that have a reset controller driver in place to bring
>> the USB IP out of reset.
>>
>> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
>> Acked-by: John Youn <johnyoun@synopsys.com>
>> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
>> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
>
> This is an USB patch. Doesn't John collect patches and send pull
> requests? Then you should put Greg Kroah-Hartman and
> linux-usb@vger.kernel.org into Cc:. Things get easily lost on
> linux-kernel.
>

Hi Philipp,

Could you take this patch for 4.8 on your reset-next?

Without the following fix from your tree, Dinh's patch will break
several platforms.

http://marc.info/?l=linux-usb&m=146473891018262&w=2

If it's too late we can probably have it go through Felipe's tree
during -rc.

Regards,
John

\
 
 \ /
  Last update: 2016-07-06 20:21    [W:0.044 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site