lkml.org 
[lkml]   [2016]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/3] pinctrl: Add STM32F746 MCU support
From
Date
Hi Paul,

On 07/05/2016 04:02 PM, Paul Gortmaker wrote:
> [[PATCH 2/3] pinctrl: Add STM32F746 MCU support] On 05/07/2016 (Tue 15:40) Alexandre TORGUE wrote:
>
>> From: Maxime Coquelin <mcoquelin.stm32@gmail.com>
>>
>> This patch which adds STM32F746 pinctrl and GPIO support, relies on the
>> generic STM32 pinctrl driver.
>>
>> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
>> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
>>
>> diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig
>> index 0f28841..4c40dae 100644
>> --- a/drivers/pinctrl/stm32/Kconfig
>> +++ b/drivers/pinctrl/stm32/Kconfig
>> @@ -13,4 +13,10 @@ config PINCTRL_STM32F429
>> default MACH_STM32F429
>> select PINCTRL_STM32
>>
>> +config PINCTRL_STM32F746
>> + bool "STMicroelectronics STM32F746 pin control" if COMPILE_TEST && !MACH_STM32F746
> ^^^^
>
>> + depends on OF
>> + default MACH_STM32F746
>> + select PINCTRL_STM32
>> +
>> + ),
>> +};
>> +
>
> [...]
>
>> +static const struct of_device_id stm32f746_pctrl_match[] = {
>> + {
>> + .compatible = "st,stm32f746-pinctrl",
>> + .data = &stm32f746_match_data,
>> + },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, stm32f746_pctrl_match);
> ^^^^^^^^^^^^^^^^^^^^
>
>> +
>> +static struct platform_driver stm32f746_pinctrl_driver = {
>> + .probe = stm32_pctl_probe,
>> + .driver = {
>> + .name = "stm32f746-pinctrl",
>> + .of_match_table = stm32f746_pctrl_match,
>> + },
>> +};
>> +
>> +static int __init stm32f746_pinctrl_init(void)
>> +{
>> + return platform_driver_register(&stm32f746_pinctrl_driver);
>> +}
>> +
>> +module_init(stm32f746_pinctrl_init);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("STM32F746 Pinctrl Driver");
>> +MODULE_AUTHOR("Maxime Coquelin <mcoquelin.stm32@gmail.com>");
>
> ...and here as well. Please don't use modular support functions and
> infrastructure for code that is only built-in. Either make sure it can
> be modular and use a tristate Kconfig, or delete all the MODULE_<tags>
> and use device_initcall() to register the driver.

Thanks for remark. I will send a v2 removing modular stuff.

Regards

Alex

>
> Thanks,
> Paul.
> --
>
>> --
>> 1.9.1
>>


\
 
 \ /
  Last update: 2016-07-06 10:41    [W:0.040 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site