[lkml]   [2016]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc
On Thu, May 05, 2016 at 11:08:52AM +0200, Olliver Schinagl wrote:
> There are 3 kinds of OLinuXino Lime2 boards.
> One without any on board storage, one with NAND storage and one with
> eMMC storage. This patch adds the eMMC variant of boards.
> eMMC storage is different from a regular SD card in that it is soldered
> on the board and cannot be changed. Additionally, it shares pins with
> the NAND module and with the second SPI port.
> Changeslog:
> v4:
> Add board compatibles
> v3:
> Add pwr-seq-emmc with the reset gpio
> v2:
> Remove unsupported no-1.8-v property, add vqmmc property
> v1:
> Initial bare bone version

This is not something we want in the commit log. This should go below
the --- so that it's dropped when applied.

Removed and applied.


Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2016-05-08 20:41    [W:0.045 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site