lkml.org 
[lkml]   [2016]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv2] musb_host: fix lockup on rxcsr_h_error
From
Date
Hello.

On 05/04/2016 09:56 PM, Bin Liu wrote:

>>>>>>>> yes, it also works with that reset and go to finish:
>>>>>>>>
>>>>>>>> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
>>>>>>>> index c3d5fc9..8cd98e7 100644
>>>>>>>> --- a/drivers/usb/musb/musb_host.c
>>>>>>>> +++ b/drivers/usb/musb/musb_host.c
>>>>>>>> @@ -1599,6 +1599,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
>>>>>>>> status = -EPROTO;
>>>>>>>> musb_writeb(epio, MUSB_RXINTERVAL, 0);
>>>>>>>>
>>>>>>>> + rx_csr &= ~MUSB_RXCSR_H_ERROR;
>>>>>>>> + musb_writew(epio, MUSB_RXCSR, rx_csr);
>>>>>>>> +
>>>>>>>> + goto finish;
>>>>>>>> } else if (rx_csr & MUSB_RXCSR_DATAERROR) {
>>>>>>>>
>>>>>>>> if (USB_ENDPOINT_XFER_ISOC != qh->type) {
>>>>>>>>
>>>>>>>
>>>>>>> Thanks for testing it.
>>>>>>
>>>>>> Have tested your patch and now both FT4232 and Huawei don't freeze on removal.
>>>>>>
>>>>>> Bin, Max thanks for fixing this issue.
>>>>>>
>>>>>> Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
>>>>>
>>>>> Thanks for testing.
>>>>>
>>>>> Can you please test the patch [1] instead? I'd like to use it as the
>>>>> fix.
>>>>>
>>>>> [1] http://marc.info/?l=linux-usb&m=146222355213935&w=2
>>>>
>>>> The patch behaves the same as the previous one.
>>>>
>>>> Kernel: 4.6-rc6
>>>
>>> Thanks for testing. I will add your Tested-by.
>>
>> If you'll resend this patch, it would be good to add it to stable
>> kernels. I've tested 3.18.32 and it fixes the error too.

> Thanks for testing.
>
> My plan is to not rush it into stable, but let it sit in v4.7 for a
> while first.

Are you serious? Fixing interrupt storm due to not cleared interrupt bit
will only be done in 4.7?

> Regards,
> -Bin.

MBR, Sergei

\
 
 \ /
  Last update: 2016-05-04 21:21    [W:0.163 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site