lkml.org 
[lkml]   [2016]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] dt-bindings: Update iProc GPIO bindings
On Mon, May 02, 2016 at 01:51:47PM -0700, Ray Jui wrote:
> Update the iProc GPIO binding document to add new compatible strings
> "brcm,iproc-gpio-v2" and "brcm,iproc-gpio-v3" for the 2nd and 3rd
> generation of the iProc GPIO controllers
>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> ---
> Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> index e427792..3a56649 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> @@ -4,7 +4,16 @@ Required properties:
>
> - compatible:
> Must be "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio",
> - "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
> + or "brcm,cygnus-crmu-gpio" for Cygnus SoCs
> +
> + "brcm,iproc-gpio" for the first generation of the GPIO controller that
> + supports full-featured pinctrl and GPIO functions used in iProc based SoCs
> +
> + "brcm,iproc-gpio-v2" for the second generation of the GPIO controller that
> + has the drive strength pinctrl support disabled, e.g., in the iProc NSP SoC
> +
> + "brcm,iproc-gpio-v3" for the third generation of the GPIO controller that
> + has the general pinctrl support completely disabled

You can have these for driver matching, but you still need SoC specific
compatible strings.

Rob

\
 
 \ /
  Last update: 2016-05-04 15:41    [W:0.125 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site