lkml.org 
[lkml]   [2016]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[path v2 3/7] drm/hisilicon/hibmc: Add crtc for DE
Date
Add crtc funcs and helper funcs for DE.

Signed-off-by: Rongrong Zou <zourongrong@gmail.com>
Signed-off-by: Jianhua Li <lijianhua@huawei.com>
---
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c | 307 ++++++++++++++++++++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.h | 29 +++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 6 +
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h | 2 +
4 files changed, 344 insertions(+)
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.h

diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
index e8e5853..87a7e52 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
@@ -26,6 +26,7 @@

#include "hibmc_drm_drv.h"
#include "hibmc_drm_regs.h"
+#include "hibmc_drm_de.h"
#include "hibmc_drm_power.h"

/* ---------------------------------------------------------------------- */
@@ -168,3 +169,309 @@ int hibmc_plane_init(struct hibmc_drm_device *hidev)
return 0;
}

+static void hibmc_crtc_enable(struct drm_crtc *crtc)
+{
+ unsigned int reg;
+ /* power mode 0 is default. */
+ struct hibmc_drm_device *hidev = crtc->dev->dev_private;
+
+ hibmc_set_power_mode(hidev, HIBMC_PW_MODE_CTL_MODE_MODE0);
+
+ /* Enable display power gate & LOCALMEM power gate*/
+ reg = readl(hidev->mmio + HIBMC_CURRENT_GATE);
+ reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK;
+ reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK;
+ reg |= HIBMC_CURR_GATE_LOCALMEM(ON);
+ reg |= HIBMC_CURR_GATE_DISPLAY(ON);
+ hibmc_set_current_gate(hidev, reg);
+}
+
+static void hibmc_crtc_disable(struct drm_crtc *crtc)
+{
+ unsigned int reg;
+ struct hibmc_drm_device *hidev = crtc->dev->dev_private;
+
+ hibmc_set_power_mode(hidev, HIBMC_PW_MODE_CTL_MODE_SLEEP);
+
+ /* Enable display power gate & LOCALMEM power gate*/
+ reg = readl(hidev->mmio + HIBMC_CURRENT_GATE);
+ reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK;
+ reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK;
+ reg |= HIBMC_CURR_GATE_LOCALMEM(OFF);
+ reg |= HIBMC_CURR_GATE_DISPLAY(OFF);
+ hibmc_set_current_gate(hidev, reg);
+}
+
+static int hibmc_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ return 0;
+}
+
+static unsigned int format_pll_reg(void)
+{
+ unsigned int pllreg = 0;
+ struct panel_pll pll = {0};
+
+ /* Note that all PLL's have the same format. Here,
+ * we just use Panel PLL parameter to work out the bit
+ * fields in the register.On returning a 32 bit number, the value can
+ * be applied to any PLL in the calling function.
+ */
+ pllreg |= HIBMC_PLL_CTRL_BYPASS(OFF) & HIBMC_PLL_CTRL_BYPASS_MASK;
+ pllreg |= HIBMC_PLL_CTRL_POWER(ON) & HIBMC_PLL_CTRL_POWER_MASK;
+ pllreg |= HIBMC_PLL_CTRL_INPUT(OSC) & HIBMC_PLL_CTRL_INPUT_MASK;
+ pllreg |= HIBMC_PLL_CTRL_POD(pll.POD) & HIBMC_PLL_CTRL_POD_MASK;
+ pllreg |= HIBMC_PLL_CTRL_OD(pll.OD) & HIBMC_PLL_CTRL_OD_MASK;
+ pllreg |= HIBMC_PLL_CTRL_N(pll.N) & HIBMC_PLL_CTRL_N_MASK;
+ pllreg |= HIBMC_PLL_CTRL_M(pll.M) & HIBMC_PLL_CTRL_M_MASK;
+
+ return pllreg;
+}
+
+static void set_vclock_hisilicon(struct drm_device *dev, unsigned long pll)
+{
+ unsigned long tmp0, tmp1;
+ struct hibmc_drm_device *hidev = dev->dev_private;
+
+ /* 1. outer_bypass_n=0 */
+ tmp0 = readl(hidev->mmio + CRT_PLL1_HS);
+ tmp0 &= 0xBFFFFFFF;
+ writel(tmp0, hidev->mmio + CRT_PLL1_HS);
+
+ /* 2. pll_pd=1?inter_bypass=1 */
+ writel(0x21000000, hidev->mmio + CRT_PLL1_HS);
+
+ /* 3. config pll */
+ writel(pll, hidev->mmio + CRT_PLL1_HS);
+
+ /* 4. delay */
+ mdelay(1);
+
+ /* 5. pll_pd =0 */
+ tmp1 = pll & ~0x01000000;
+ writel(tmp1, hidev->mmio + CRT_PLL1_HS);
+
+ /* 6. delay */
+ mdelay(1);
+
+ /* 7. inter_bypass=0 */
+ tmp1 &= ~0x20000000;
+ writel(tmp1, hidev->mmio + CRT_PLL1_HS);
+
+ /* 8. delay */
+ mdelay(1);
+
+ /* 9. outer_bypass_n=1 */
+ tmp1 |= 0x40000000;
+ writel(tmp1, hidev->mmio + CRT_PLL1_HS);
+}
+
+/* This function takes care the extra registers and bit fields required to
+*setup a mode in board.
+*Explanation about Display Control register:
+*FPGA only supports 7 predefined pixel clocks, and clock select is
+*in bit 4:0 of new register 0x802a8.
+*/
+static unsigned int display_ctrl_adjust(struct drm_device *dev,
+ struct drm_display_mode *mode,
+ unsigned int ctrl)
+{
+ unsigned long x, y;
+ unsigned long pll1; /* bit[31:0] of PLL */
+ unsigned long pll2; /* bit[63:32] of PLL */
+ struct hibmc_drm_device *hidev = dev->dev_private;
+
+ x = mode->hdisplay;
+ y = mode->vdisplay;
+
+ /* Hisilicon has to set up a new register for PLL control
+ *(CRT_PLL1_HS & CRT_PLL2_HS).
+ */
+ if (x == 800 && y == 600) {
+ pll1 = CRT_PLL1_HS_40MHZ;
+ pll2 = CRT_PLL2_HS_40MHZ;
+ } else if (x == 1024 && y == 768) {
+ pll1 = CRT_PLL1_HS_65MHZ;
+ pll2 = CRT_PLL2_HS_65MHZ;
+ } else if (x == 1152 && y == 864) {
+ pll1 = CRT_PLL1_HS_80MHZ_1152;
+ pll2 = CRT_PLL2_HS_80MHZ;
+ } else if (x == 1280 && y == 768) {
+ pll1 = CRT_PLL1_HS_80MHZ;
+ pll2 = CRT_PLL2_HS_80MHZ;
+ } else if (x == 1280 && y == 720) {
+ pll1 = CRT_PLL1_HS_74MHZ;
+ pll2 = CRT_PLL2_HS_74MHZ;
+ } else if (x == 1280 && y == 960) {
+ pll1 = CRT_PLL1_HS_108MHZ;
+ pll2 = CRT_PLL2_HS_108MHZ;
+ } else if (x == 1280 && y == 1024) {
+ pll1 = CRT_PLL1_HS_108MHZ;
+ pll2 = CRT_PLL2_HS_108MHZ;
+ } else if (x == 1600 && y == 1200) {
+ pll1 = CRT_PLL1_HS_162MHZ;
+ pll2 = CRT_PLL2_HS_162MHZ;
+ } else if (x == 1920 && y == 1080) {
+ pll1 = CRT_PLL1_HS_148MHZ;
+ pll2 = CRT_PLL2_HS_148MHZ;
+ } else if (x == 1920 && y == 1200) {
+ pll1 = CRT_PLL1_HS_193MHZ;
+ pll2 = CRT_PLL2_HS_193MHZ;
+ } else /* default to VGA clock */ {
+ pll1 = CRT_PLL1_HS_25MHZ;
+ pll2 = CRT_PLL2_HS_25MHZ;
+ }
+
+ writel(pll2, hidev->mmio + CRT_PLL2_HS);
+ set_vclock_hisilicon(dev, pll1);
+
+ /* Hisilicon has to set up the top-left and bottom-right
+ * registers as well.
+ * Note that normal chip only use those two register for
+ * auto-centering mode.
+ */
+ writel((HIBMC_CRT_AUTO_CENTERING_TL_TOP(0) &
+ HIBMC_CRT_AUTO_CENTERING_TL_TOP_MSK) |
+ (HIBMC_CRT_AUTO_CENTERING_TL_LEFT(0) &
+ HIBMC_CRT_AUTO_CENTERING_TL_LEFT_MSK),
+ hidev->mmio + HIBMC_CRT_AUTO_CENTERING_TL);
+
+ writel((HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM(y - 1) &
+ HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM_MASK) |
+ (HIBMC_CRT_AUTO_CENTERING_BR_RIGHT(x - 1) &
+ HIBMC_CRT_AUTO_CENTERING_BR_RIGHT_MASK),
+ hidev->mmio + HIBMC_CRT_AUTO_CENTERING_BR);
+
+ /* Assume common fields in ctrl have been properly set before
+ * calling this function.
+ * This function only sets the extra fields in ctrl.
+ */
+
+ /* Set bit 25 of display controller: Select CRT or VGA clock */
+ ctrl &= ~HIBMC_CRT_DISP_CTL_CRTSELECT_MASK;
+ ctrl &= ~HIBMC_CRT_DISP_CTL_CLOCK_PHASE_MASK;
+
+ ctrl |= HIBMC_CRT_DISP_CTL_CRTSELECT(CRTSELECT_CRT);
+
+ /*ctrl = FIELD_SET(ctrl, HIBMC_CRT_DISP_CTL, CRTSELECT, CRT);*/
+
+ /* Set bit 14 of display controller */
+ /*ctrl &= FIELD_CLEAR(HIBMC_CRT_DISP_CTL, CLOCK_PHASE);*/
+
+ /* clock_phase_polarity is 0 */
+ ctrl |= HIBMC_CRT_DISP_CTL_CLOCK_PHASE(PHASE_ACTIVE_HIGH);
+ /*ctrl = FIELD_SET(ctrl, HIBMC_CRT_DISP_CTL,*/
+ /*CLOCK_PHASE, ACTIVE_HIGH);*/
+
+ writel(ctrl, hidev->mmio + HIBMC_CRT_DISP_CTL);
+
+ return ctrl;
+}
+
+static void hibmc_crtc_mode_set_nofb(struct drm_crtc *crtc)
+{
+ unsigned int val;
+ struct drm_display_mode *mode = &crtc->state->mode;
+ struct drm_device *dev = crtc->dev;
+ struct hibmc_drm_device *hidev = dev->dev_private;
+
+ writel(format_pll_reg(), hidev->mmio + HIBMC_CRT_PLL_CTRL);
+ writel((HIBMC_CRT_HORZ_TOTAL_TOTAL(mode->htotal - 1) &
+ HIBMC_CRT_HORZ_TOTAL_TOTAL_MASK) |
+ (HIBMC_CRT_HORZ_TOTAL_DISPLAY_END(mode->hdisplay - 1) &
+ HIBMC_CRT_HORZ_TOTAL_DISPLAY_END_MASK),
+ hidev->mmio + HIBMC_CRT_HORZ_TOTAL);
+
+ writel((HIBMC_CRT_HORZ_SYNC_WIDTH(mode->hsync_end - mode->hsync_start)
+ & HIBMC_CRT_HORZ_SYNC_WIDTH_MASK) |
+ (HIBMC_CRT_HORZ_SYNC_START(mode->hsync_start - 1)
+ & HIBMC_CRT_HORZ_SYNC_START_MASK),
+ hidev->mmio + HIBMC_CRT_HORZ_SYNC);
+
+ writel((HIBMC_CRT_VERT_TOTAL_TOTAL(mode->vtotal - 1) &
+ HIBMC_CRT_VERT_TOTAL_TOTAL_MASK) |
+ (HIBMC_CRT_VERT_TOTAL_DISPLAY_END(mode->vdisplay - 1) &
+ HIBMC_CRT_VERT_TOTAL_DISPLAY_END_MASK),
+ hidev->mmio + HIBMC_CRT_VERT_TOTAL);
+
+ writel((HIBMC_CRT_VERT_SYNC_HEIGHT(mode->vsync_end - mode->vsync_start)
+ & HIBMC_CRT_VERT_SYNC_HEIGHT_MASK) |
+ (HIBMC_CRT_VERT_SYNC_START(mode->vsync_start - 1) &
+ HIBMC_CRT_VERT_SYNC_START_MASK),
+ hidev->mmio + HIBMC_CRT_VERT_SYNC);
+
+ val = HIBMC_CRT_DISP_CTL_VSYNC_PHASE(0) &
+ HIBMC_CRT_DISP_CTL_VSYNC_PHASE_MASK;
+ val |= HIBMC_CRT_DISP_CTL_HSYNC_PHASE(0) &
+ HIBMC_CRT_DISP_CTL_HSYNC_PHASE_MASK;
+ val |= HIBMC_CRT_DISP_CTL_TIMING(ENABLE);
+ val |= HIBMC_CRT_DISP_CTL_PLANE(ENABLE);
+
+ display_ctrl_adjust(dev, mode, val);
+}
+
+static void hibmc_crtc_atomic_begin(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_state)
+{
+ unsigned int reg;
+ struct drm_device *dev = crtc->dev;
+ struct hibmc_drm_device *hidev = dev->dev_private;
+
+ hibmc_set_power_mode(hidev, HIBMC_PW_MODE_CTL_MODE_MODE0);
+
+ /* Enable display power gate & LOCALMEM power gate*/
+ reg = readl(hidev->mmio + HIBMC_CURRENT_GATE);
+ reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK;
+ reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK;
+ reg |= HIBMC_CURR_GATE_DISPLAY(ON);
+ reg |= HIBMC_CURR_GATE_LOCALMEM(ON);
+ hibmc_set_current_gate(hidev, reg);
+
+ /* We can add more initialization as needed. */
+}
+
+static void hibmc_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_state)
+
+{
+}
+
+/* These provide the minimum set of functions required to handle a CRTC */
+static const struct drm_crtc_funcs hibmc_crtc_funcs = {
+ .page_flip = drm_atomic_helper_page_flip,
+ .set_config = drm_atomic_helper_set_config,
+ .destroy = drm_crtc_cleanup,
+ .reset = drm_atomic_helper_crtc_reset,
+ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static const struct drm_crtc_helper_funcs hibmc_crtc_helper_funcs = {
+ .enable = hibmc_crtc_enable,
+ .disable = hibmc_crtc_disable,
+ .mode_set_nofb = hibmc_crtc_mode_set_nofb,
+ .atomic_check = hibmc_crtc_atomic_check,
+ .atomic_begin = hibmc_crtc_atomic_begin,
+ .atomic_flush = hibmc_crtc_atomic_flush,
+};
+
+int hibmc_crtc_init(struct hibmc_drm_device *hidev)
+{
+ struct drm_device *dev = hidev->dev;
+ struct drm_crtc *crtc = &hidev->crtc;
+ struct drm_plane *plane = &hidev->plane;
+ int ret;
+
+ ret = drm_crtc_init_with_planes(dev, crtc, plane,
+ NULL, &hibmc_crtc_funcs, NULL);
+ if (ret) {
+ DRM_ERROR("failed to init crtc.\n");
+ return ret;
+ }
+
+ drm_mode_crtc_set_gamma_size(crtc, 256);
+ drm_crtc_helper_add(crtc, &hibmc_crtc_helper_funcs);
+ return 0;
+}
+
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.h
new file mode 100644
index 0000000..c22f0a4
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.h
@@ -0,0 +1,29 @@
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Rongrong Zou <zourongrong@huawei>
+ * Rongrong Zou <zourongrong@gmail.com>
+ * Jianhua Li <lijianhua@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef HIBMC_DRM_DE_H
+#define HIBMC_DRM_DE_H
+
+struct panel_pll {
+ unsigned long M;
+ unsigned long N;
+ unsigned long OD;
+ unsigned long POD;
+};
+
+#endif
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
index 794250a..f7837cc 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -123,6 +123,12 @@ static int hibmc_kms_init(struct hibmc_drm_device *hidev)
return ret;
}

+ ret = hibmc_crtc_init(hidev);
+ if (ret) {
+ DRM_ERROR("failed to init crtc.\n");
+ return ret;
+ }
+
return 0;
}

diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
index 6c7985d..e64ec8d 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
@@ -33,10 +33,12 @@ struct hibmc_drm_device {
/* drm */
struct drm_device *dev;
struct drm_plane plane;
+ struct drm_crtc crtc;
bool mode_config_initialized;
};

int hibmc_plane_init(struct hibmc_drm_device *hidev);
+int hibmc_crtc_init(struct hibmc_drm_device *hidev);


#endif
--
1.9.1
\
 
 \ /
  Last update: 2016-05-29 12:01    [W:0.154 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site