lkml.org 
[lkml]   [2016]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] dell-wmi: Rework code for generating sparse keymap and processing WMI events
Date
This patch unify procedure for generating sparse keymap and unify also big
switch code for processing WMI events of different types. After this patch
dell-wmi driver does not differ between "old" and "new" hotkey type.

It construct sparse keymap table with all WMI codes. It is because on some
laptops (e.g. Dell Latitude E6440) ACPI/firmware send both event types (old
and new).

Each WMI code in sparse keymap table is prefixed by 16bit event type, so it
does not change functionality on laptops with "old" hotkey support (those
without scancodes in DMI).

This allow us to distinguish between same WMI codes with different types in
sparse keymap. Thanks to this WMI events of type 0x0011 were moved from big
switch into sparse keymap table too.

This patch also fixes possible bug in parsing WMI event buffer introduced
in commit 5ea2559726b7 ("dell-wmi: Add support for new Dell systems"). That
commit changed buffer type from int* to u16* without fixing code. More at:
http://lkml.iu.edu/hypermail/linux/kernel/1507.0/01950.html

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
---
drivers/platform/x86/dell-wmi.c | 213 +++++++++++++++++++--------------------
1 file changed, 106 insertions(+), 107 deletions(-)

diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 7aac1dc..24b8103 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -80,12 +80,13 @@ static const struct dmi_system_id dell_wmi_smbios_list[] __initconst = {
};

/*
+ * Keymap for WMI events of type 0x0000
+ *
* Certain keys are flagged as KE_IGNORE. All of these are either
* notifications (rather than requests for change) or are also sent
* via the keyboard controller so should not be sent again.
*/
-
-static const struct key_entry dell_wmi_legacy_keymap[] __initconst = {
+static const struct key_entry dell_wmi_keymap_type_0000[] __initconst = {

{ KE_IGNORE, 0x003a, { KEY_CAPSLOCK } },

@@ -182,12 +183,8 @@ static const struct key_entry dell_wmi_legacy_keymap[] __initconst = {
{ KE_IGNORE, 0xe0f8, { KEY_VOLUMEDOWN } },
{ KE_IGNORE, 0xe0f9, { KEY_VOLUMEUP } },

- { KE_END, 0 }
-
};

-static bool dell_new_hk_type;
-
struct dell_bios_keymap_entry {
u16 scancode;
u16 keycode;
@@ -201,6 +198,7 @@ struct dell_bios_hotkey_table {

struct dell_dmi_results {
int err;
+ int keymap_size;
struct key_entry *keymap;
};

@@ -249,10 +247,12 @@ static const u16 bios_to_linux_keycode[256] __initconst = {
};

/*
+ * Keymap for WMI events of type 0x0010
+ *
* These are applied if the 0xB2 DMI hotkey table is present and doesn't
* override them.
*/
-static const struct key_entry dell_wmi_extra_keymap[] __initconst = {
+static const struct key_entry dell_wmi_keymap_type_0010[] __initconst = {
/* Fn-lock */
{ KE_IGNORE, 0x151, { KEY_RESERVED } },

@@ -272,21 +272,39 @@ static const struct key_entry dell_wmi_extra_keymap[] __initconst = {
{ KE_IGNORE, 0x155, { KEY_RESERVED } },
};

+/*
+ * Keymap for WMI events of type 0x0011
+ */
+static const struct key_entry dell_wmi_keymap_type_0011[] __initconst = {
+ /* Battery unplugged */
+ { KE_IGNORE, 0xfff0, { KEY_RESERVED } },
+
+ /* Battery inserted */
+ { KE_IGNORE, 0xfff1, { KEY_RESERVED } },
+
+ /* Keyboard backlight level changed */
+ { KE_IGNORE, 0x01e1, { KEY_RESERVED } },
+ { KE_IGNORE, 0x02ea, { KEY_RESERVED } },
+ { KE_IGNORE, 0x02eb, { KEY_RESERVED } },
+ { KE_IGNORE, 0x02ec, { KEY_RESERVED } },
+ { KE_IGNORE, 0x02f6, { KEY_RESERVED } },
+};
+
static struct input_dev *dell_wmi_input_dev;

-static void dell_wmi_process_key(int reported_key)
+static void dell_wmi_process_key(int type, int code)
{
const struct key_entry *key;

key = sparse_keymap_entry_from_scancode(dell_wmi_input_dev,
- reported_key);
+ (type << 16) | code);
if (!key) {
- pr_info("Unknown key with scancode 0x%x pressed\n",
- reported_key);
+ pr_info("Unknown key with type 0x%x and code 0x%x pressed\n",
+ type, code);
return;
}

- pr_debug("Key %x pressed\n", reported_key);
+ pr_debug("Key with type 0x%x and code 0x%x pressed\n", type, code);

/* Don't report brightness notifications that will also come via ACPI */
if ((key->keycode == KEY_BRIGHTNESSUP ||
@@ -294,7 +312,7 @@ static void dell_wmi_process_key(int reported_key)
acpi_video_handles_brightness_key_presses())
return;

- if (reported_key == 0xe025 && !wmi_requires_smbios_request)
+ if (type == 0x0000 && code == 0xe025 && !wmi_requires_smbios_request)
return;

sparse_keymap_report_entry(dell_wmi_input_dev, key, 1, true);
@@ -332,18 +350,6 @@ static void dell_wmi_notify(u32 value, void *context)

buffer_entry = (u16 *)obj->buffer.pointer;
buffer_size = obj->buffer.length/2;
-
- if (!dell_new_hk_type) {
- if (buffer_size >= 3 && buffer_entry[1] == 0x0)
- dell_wmi_process_key(buffer_entry[2]);
- else if (buffer_size >= 2)
- dell_wmi_process_key(buffer_entry[1]);
- else
- pr_info("Received unknown WMI event\n");
- kfree(obj);
- return;
- }
-
buffer_end = buffer_entry + buffer_size;

/*
@@ -378,59 +384,21 @@ static void dell_wmi_notify(u32 value, void *context)
pr_debug("Process buffer (%*ph)\n", len*2, buffer_entry);

switch (buffer_entry[1]) {
- case 0x00:
- for (i = 2; i < len; ++i) {
- switch (buffer_entry[i]) {
- case 0xe043:
- /* NIC Link is Up */
- pr_debug("NIC Link is Up\n");
- break;
- case 0xe044:
- /* NIC Link is Down */
- pr_debug("NIC Link is Down\n");
- break;
- case 0xe045:
- /* Unknown event but defined in DSDT */
- default:
- /* Unknown event */
- pr_info("Unknown WMI event type 0x00: "
- "0x%x\n", (int)buffer_entry[i]);
- break;
- }
- }
+ case 0x0000:
+ /* One key pressed or event occurred */
+ if (len > 2)
+ dell_wmi_process_key(0x0000, buffer_entry[2]);
+ /* Other entries in buffer could contain additional information */
break;
- case 0x10:
- /* Keys pressed */
+ case 0x0010:
+ /* Sequence of keys pressed */
for (i = 2; i < len; ++i)
- dell_wmi_process_key(buffer_entry[i]);
+ dell_wmi_process_key(0x0010, buffer_entry[i]);
break;
- case 0x11:
- for (i = 2; i < len; ++i) {
- switch (buffer_entry[i]) {
- case 0xfff0:
- /* Battery unplugged */
- pr_debug("Battery unplugged\n");
- break;
- case 0xfff1:
- /* Battery inserted */
- pr_debug("Battery inserted\n");
- break;
- case 0x01e1:
- case 0x02ea:
- case 0x02eb:
- case 0x02ec:
- case 0x02f6:
- /* Keyboard backlight level changed */
- pr_debug("Keyboard backlight level "
- "changed\n");
- break;
- default:
- /* Unknown event */
- pr_info("Unknown WMI event type 0x11: "
- "0x%x\n", (int)buffer_entry[i]);
- break;
- }
- }
+ case 0x0011:
+ /* Sequence of events occurred */
+ for (i = 2; i < len; ++i)
+ dell_wmi_process_key(0x0011, buffer_entry[i]);
break;
default:
/* Unknown event */
@@ -458,7 +426,6 @@ static bool have_scancode(u32 scancode, const struct key_entry *keymap, int len)
}

static void __init handle_dmi_entry(const struct dmi_header *dm,
-
void *opaque)

{
@@ -466,7 +433,6 @@ static void __init handle_dmi_entry(const struct dmi_header *dm,
struct dell_bios_hotkey_table *table;
int hotkey_num, i, pos = 0;
struct key_entry *keymap;
- int num_bios_keys;

if (results->err || results->keymap)
return; /* We already found the hotkey table. */
@@ -490,8 +456,7 @@ static void __init handle_dmi_entry(const struct dmi_header *dm,
return;
}

- keymap = kcalloc(hotkey_num + ARRAY_SIZE(dell_wmi_extra_keymap) + 1,
- sizeof(struct key_entry), GFP_KERNEL);
+ keymap = kcalloc(hotkey_num, sizeof(struct key_entry), GFP_KERNEL);
if (!keymap) {
results->err = -ENOMEM;
return;
@@ -528,31 +493,15 @@ static void __init handle_dmi_entry(const struct dmi_header *dm,
pos++;
}

- num_bios_keys = pos;
-
- for (i = 0; i < ARRAY_SIZE(dell_wmi_extra_keymap); i++) {
- const struct key_entry *entry = &dell_wmi_extra_keymap[i];
-
- /*
- * Check if we've already found this scancode. This takes
- * quadratic time, but it doesn't matter unless the list
- * of extra keys gets very long.
- */
- if (!have_scancode(entry->code, keymap, num_bios_keys)) {
- keymap[pos] = *entry;
- pos++;
- }
- }
-
- keymap[pos].type = KE_END;
-
results->keymap = keymap;
+ results->keymap_size = pos;
}

static int __init dell_wmi_input_setup(void)
{
struct dell_dmi_results dmi_results = {};
- int err;
+ struct key_entry *keymap;
+ int err, i, pos = 0;

dell_wmi_input_dev = input_allocate_device();
if (!dell_wmi_input_dev)
@@ -576,21 +525,71 @@ static int __init dell_wmi_input_setup(void)
goto err_free_dev;
}

+ keymap = kcalloc(dmi_results.keymap_size +
+ ARRAY_SIZE(dell_wmi_keymap_type_0000) +
+ ARRAY_SIZE(dell_wmi_keymap_type_0010) +
+ ARRAY_SIZE(dell_wmi_keymap_type_0011) +
+ 1,
+ sizeof(struct key_entry), GFP_KERNEL);
+ if (!keymap) {
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+
+ /* Append table with events of type 0x0010 which comes from DMI */
if (dmi_results.keymap) {
- dell_new_hk_type = true;
+ for (i = 0; i < dmi_results.keymap_size; i++) {
+ keymap[pos] = dmi_results.keymap[i];
+ keymap[pos].code |= (0x0010 << 16);
+ pos++;
+ }
+ kfree(dmi_results.keymap);
+ }

- err = sparse_keymap_setup(dell_wmi_input_dev,
- dmi_results.keymap, NULL);
+ /* Append table with extra events of type 0x0010 which are not in DMI */
+ for (i = 0; i < ARRAY_SIZE(dell_wmi_keymap_type_0010); i++) {
+ const struct key_entry *entry = &dell_wmi_keymap_type_0010[i];

/*
- * Sparse keymap library makes a copy of keymap so we
- * don't need the original one that was allocated.
+ * Check if we've already found this scancode. This takes
+ * quadratic time, but it doesn't matter unless the list
+ * of extra keys gets very long.
*/
- kfree(dmi_results.keymap);
- } else {
- err = sparse_keymap_setup(dell_wmi_input_dev,
- dell_wmi_legacy_keymap, NULL);
+ if (dmi_results.keymap_size &&
+ have_scancode(entry->code | (0x0010 << 16),
+ keymap, dmi_results.keymap_size)
+ )
+ continue;
+
+ keymap[pos] = *entry;
+ keymap[pos].code |= (0x0010 << 16);
+ pos++;
+ }
+
+ /* Append table with events of type 0x0011 */
+ for (i = 0; i < ARRAY_SIZE(dell_wmi_keymap_type_0011); i++) {
+ keymap[pos] = dell_wmi_keymap_type_0011[i];
+ keymap[pos].code |= (0x0011 << 16);
+ pos++;
}
+
+ /*
+ * Now append also table with "legacy" events of type 0x0000. Some of
+ * them are reported also on laptops which have scancodes in DMI.
+ */
+ for (i = 0; i < ARRAY_SIZE(dell_wmi_keymap_type_0000); i++) {
+ keymap[pos] = dell_wmi_keymap_type_0000[i];
+ pos++;
+ }
+
+ keymap[pos].type = KE_END;
+
+ err = sparse_keymap_setup(dell_wmi_input_dev, keymap, NULL);
+ /*
+ * Sparse keymap library makes a copy of keymap so we don't need the
+ * original one that was allocated.
+ */
+ kfree(keymap);
if (err)
goto err_free_dev;

--
1.7.9.5
\
 
 \ /
  Last update: 2016-05-22 14:01    [W:0.216 / U:3.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site