Messages in this thread | | | Subject | Re: [PATCH] arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368 | From | Shawn Lin <> | Date | Fri, 20 May 2016 20:55:56 +0800 |
| |
在 2016/5/18 22:41, Caesar Wang 写道: > The 2nd additional region is the GIC virtual cpu interface register > base and size. > > As the gic400 of rk3368 says, the cpu interface register map as below > > : > > -0x0000 GICC_CTRL > . > . > . > -0x00fc GICC_IIDR > -0x1000 GICC_IDR > > Obviously, the region size should be greater than 0x1000. > So we should make sure to include the GICC_IDR since the kernel will access > it in some cases. >
yes, address range for GICC_* should be from 0x2000 to 0x3fff according to gic400 memory map Table 3-1.
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com> > Cc: Heiko Stuebner <heiko@sntech.de> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-rockchip@lists.infradead.org > > --- > > arch/arm64/boot/dts/rockchip/rk3368.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi > index 8b4a7c9..080203e 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi > @@ -670,7 +670,7 @@ > #address-cells = <0>; > > reg = <0x0 0xffb71000 0x0 0x1000>, > - <0x0 0xffb72000 0x0 0x1000>, > + <0x0 0xffb72000 0x0 0x2000>, > <0x0 0xffb74000 0x0 0x2000>, > <0x0 0xffb76000 0x0 0x2000>; > interrupts = <GIC_PPI 9 >
-- Best Regards Shawn Lin
| |