lkml.org 
[lkml]   [2016]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: malloc() size in CMA region seems to be aligned to CMA_ALIGNMENT
On Wed, May 18, 2016 at 09:15:13PM +0800, lunar12 lunartwix wrote:
> 2016-05-18 16:48 GMT+08:00 Michal Hocko <mhocko@kernel.org>:
> > [CC linux-mm and some usual suspects]

Michal, Thanks.

> >
> > On Tue 17-05-16 23:37:55, lunar12 lunartwix wrote:
> >> A 4MB dma_alloc_coherent in kernel after malloc(2*1024) 40 times in
> >> CMA region by user space will cause an error on our ARM 3.18 kernel
> >> platform with a 32MB CMA.
> >>
> >> It seems that the malloc in CMA region will be aligned to
> >> CMA_ALIGNMENT everytime even if the requested malloc size is very
> >> small so the CMA region is not available after the malloc operations.
> >>
> >> Is there any configuraiton that can change this behavior??
> >>
> >> Thanks
> >>
> >> Cheers
> >> Ken
> >
> > --
> > Michal Hocko
> > SUSE Labs
>
> Update more information and any comment would be very appreciated
>
> CMA region (from boot message):
> Reserved memory: created CMA memory pool at 0x22e00000, size 80 MiB
>
> User space test program:
>
> do
> {
>
> addr = malloc(2*1024);
> memset((void *)addr,2*1024,0x5A);
> vaddr=(unsigned int)addr;
>
> //get_user_page & page_to_phys in kernel
> ioctl(devfd, IOCTL_MSYS_USER_TO_PHYSICAL, &addr)
>
> count++;
> paddr=(unsigned int)addr;
>
> if(paddr>0x22E00000)
> {
> printf("USR:0x%08X 0x%08X %d\n",vaddr,paddr,count);
> }
> } while(addr!=NULL);
>
>
> System print out:
>
> USR:0x0164B248 0x27C00000 11337
> USR:0x0164BA50 0x27C00000 11338
> USR:0x0164C258 0x27800000 11339
> USR:0x0164CA60 0x27800000 11340
> USR:0x0164D268 0x27600000 11341
> USR:0x0164DA70 0x27600000 11342
> USR:0x0164E278 0x27400000 11343
> USR:0x0164EA80 0x27400000 11344
> USR:0x0164F288 0x27200000 11345
> USR:0x0164FA90 0x27200000 11346
> ....
> It seems that an 2MB CMA would be occpuied every 2 malloc()

I'm not familiar with device part of CMA but try to analyze.

Above output means that your device maps 2 MB CMA mem to 1 page. I guess
that your device requires such alignment. Could you check
CONFIG_CMA_ALIGNMENT? And, insert to log to below snippet
in drivers/base/dma-contiguous.c to check your device align requirement?

struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int align)
{
if (align > CONFIG_CMA_ALIGNMENT)
align = CONFIG_CMA_ALIGNMENT;
return cma_alloc(dev_get_cma_area(dev), count, align);
}

I guess changing CONFIG_CMA_ALIGNMENT works for you, but, since it
ignore your device align requirement, I'm not sure that it is right solution.

Thanks.

\
 
 \ /
  Last update: 2016-05-19 03:01    [W:0.065 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site