lkml.org 
[lkml]   [2016]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Crashes in -next due to 'phy: add support for a reset-gpio specification'
From
Date
Le 17/05/2016 21:37, Guenter Roeck a écrit :
> Hi,
>
> my xtensa qemu tests crash in -next as follows.
>
> [ ... ]
>
> [ 9.366256] libphy: ethoc-mdio: probed
> [ 9.367389] (null): could not attach to PHY
> [ 9.368555] (null): failed to probe MDIO bus
> [ 9.371540] Unable to handle kernel paging request at virtual address
> 0000001c
> [ 9.371540] pc = d0320926, ra = 903209d1
> [ 9.375358] Oops: sig: 11 [#1]
> [ 9.376081] PREEMPT
> [ 9.377080] CPU: 0 PID: 1 Comm: swapper Not tainted
> 4.6.0-next-20160517 #1
> [ 9.378397] task: d7c2c000 ti: d7c30000 task.ti: d7c30000
> [ 9.379394] a00: 903209d1 d7c31bd0 d7fb5810 00000001 00000000
> 00000000 d7f45c00 d7c31bd0
> [ 9.382298] a08: 00000000 00000000 00000000 00000000 00060100
> d04b0c10 d7f45dfc d7c31bb0
> [ 9.385732] pc: d0320926, ps: 00060110, depc: 00000018, excvaddr:
> 0000001c
> [ 9.387061] lbeg: d0322e35, lend: d0322e57 lcount: 00000000, sar:
> 00000011
> [ 9.388173]
> Stack: d7c31be0 00060700 d7f45c00 d7c31bd0 9021d509 d7c31c30 d7f45c00
> 00000000
> d0485dcc d0485dcc d7fb5810 d7c2c000 00000000 d7c31c30 d7f45c00
> d025befc
> d0485dcc d7c30000 d7f45c34 d7c31bf0 9021c985 d7c31c50 d7f45c00
> d7f45c34
> [ 9.396652] Call Trace:
> [ 9.397469] [<d021d4d9>] __device_release_driver+0x7d/0x98
> [ 9.398869] [<d021d509>] device_release_driver+0x15/0x20
> [ 9.400247] [<d021c985>] bus_remove_device+0xc1/0xd4
> [ 9.401569] [<d021a935>] device_del+0x109/0x15c
> [ 9.402794] [<d025c3f9>] phy_mdio_device_remove+0xd/0x18
> [ 9.404124] [<d025d264>] mdiobus_unregister+0x40/0x5c
> [ 9.405444] [<d025ff44>] ethoc_probe+0x534/0x5b8
> [ 9.406742] [<d021e2e0>] platform_drv_probe+0x28/0x48
> [ 9.408122] [<d021d1e5>] driver_probe_device+0x101/0x234
> [ 9.409499] [<d021d395>] __driver_attach+0x7d/0x98
> [ 9.410809] [<d021bd80>] bus_for_each_dev+0x30/0x5c
> [ 9.412104] [<d021cdf0>] driver_attach+0x14/0x18
> [ 9.413385] [<d021ca61>] bus_add_driver+0xc9/0x198
> [ 9.414686] [<d021d7d4>] driver_register+0x70/0xa0
> [ 9.416001] [<d021e2b4>] __platform_driver_register+0x24/0x28
> [ 9.417463] [<d04a1d34>] ethoc_driver_init+0x10/0x14
> [ 9.418824] [<d00032c8>] do_one_initcall+0x80/0x1ac
> [ 9.420083] [<d049386d>] kernel_init_freeable+0x131/0x198
> [ 9.421504] [<d03236e8>] kernel_init+0xc/0xb0
> [ 9.422693] [<d000482c>] ret_from_kernel_thread+0x8/0xc
>
> Bisect points to commit da47b4572056 ("phy: add support for a reset-gpio
> specification").
> Bisect log is attached. Reverting the patch fixes the problem.

Aside from what you pointed out, this patch was still in dicussion when
it got merged, since we got a concurrent patch from Sergei which tries
to deal with the same kind of problem.

Do you mind sending a revert, or I can do that first thing in the morning.

>
> I think there may be a number of problems, all of them exposed by the patch
> but really separate.
>
> GPIOLIB is not configured in my test case, meaning gpiod_get_optional()
> returns -ENOSYS, and phy_probe() thus returns an error. Question here is if
> it is really appropriate for the XXX_optional() gpiolib functions to return
> an error if GPIOLIB is not configured. Either case, result is that pretty
> much all phy registrations will now fail if GPIOLIB is not configured.
>
> Also, I suspect that there may be a bug in the error handling path
> of ethoc_probe(). No idea what exactly is wrong, though. Other drivers
> use pretty much the same code sequence for mdio registration and associated
> error handling.
>
> Last but not least, something seems to be wrong with the use of dev_err()
> with &netdev->dev if register_netdev() has not yet been called. Maybe
> someone
> has some insight ?

It all depends if SET_NETDEV_DEV() has had a chance to run, but in
general it is kind of a bad idea to use netdev_* before the interface
has been registered, since it won't have any valid name.
--
Florian

\
 
 \ /
  Last update: 2016-05-18 07:21    [W:0.140 / U:2.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site