lkml.org 
[lkml]   [2016]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 03/15] MIPS: PCI: Compatibility with ARM-like PCI host drivers
From
Date
On 03/02/16 03:30, Paul Burton wrote:
> Introduce support for struct hw_pci & the associated pci_common_init_dev
> function as used by the PCI drivers written for ARM platforms under
> drivers/pci. This is in preparation for reusing the xilinx-pcie driver
> on the MIPS Boston board.
>
> Platforms that make use of this more generic code will need to select
> CONFIG_MIPS_GENERIC_PCI. Platforms which don't will continue to work as
> they have, with the intent that PCI drivers be migrated towards struct
> hw_pci & drivers/pci/ over time.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>

Tested-by: Florian Fainelli <f.fainelli@gmail.com>

FWIW , with a out of tree (for now) PCIE RC driver written with ARM PCI
setup in mind, and this worked like a charm, thanks!
--
Florian

\
 
 \ /
  Last update: 2016-03-08 20:21    [W:0.053 / U:1.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site