Messages in this thread | | | Date | Tue, 08 Mar 2016 10:43:35 +0100 | From | Jacek Anaszewski <> | Subject | Re: [PATCH v2 0/4] leds: Add driver for the ISSI IS31FL32xx family of LED controllers |
| |
Hi David,
Thanks for posting the final version. Very nice driver. Applied whole series, after dropping leds-sn3218 with its DT bindings. Stefan, thanks for testing the driver on the Si-En hardware.
Thanks, Jacek Anaszewski
On 03/08/2016 01:57 AM, David Rivshin (Allworx) wrote: > From: David Rivshin <drivshin@allworx.com> > > This series adds support for the ISSI IS31FL32xx family of I2C LED > controllers. Since the IS31FL3218/3216 are actually the same devices as > the SN3218/3216, adds their compatible strings as aliases. > > As requested, this series is based on the current linux-leds/for-next, minus > patch 2 and 3 of the standalone sn3218 driver. As such, it will not directly > apply to the current linux-next without minor merges in the leds Kconfig > and Makefile. This will apply cleanly to v4.5-rc7, albeit with a compiler > warning in patch 3 (which is fixed elsewhere in linux-next). > > Changes from v1 [1]: > - swapped node name and label in binding example > - removed line stating filename from file header comment of is31fl32xx.c > - dropped #includes for err.h and of_platform.h > - added #includes for device.h, of.h, and of_device.h > - patch 4 no longer removes leds-sn3218, as that will be done separately > - patch 4 commit log no longer references leds-sn3218 driver > - added Rob's acks for patches 1, 2, and 4 > - added Tested-By from Stefan (for SN3218) > > Changes from RFC [2]: > - Removed max-brightness DT property. > - Added #address-cells and #size-cells properties to the example DT. > - Refer to these devices as "LED controllers" in Kconfig. > - Removed redundant last sentence from Kconfig entry > - Removed unnecessary debug code. > - Do not set led_classdev.brightness to 0 explicitly, as it is > already initialized to 0 by devm_kzalloc(). > - Used of_property_read_string() instead of of_get_property(). > - Fail immediately on DT parsing error in a child node, rather than > continuing on with the non-faulty ones. > - Added additional comments for some things that might be non-obvious. > - Added constants for the location of the SSD bit in the SHUTDOWN > register, and the 3216's CONFIG register. > - Added special sw_shutdown_func for the 3216 device, as that bit > is in a different register, at a different position, and has reverse > polarity compared to all the other devices. > - Refactored is31fl32xx_init_regs() to separate out some logic into > is31fl32xx_reset_regs() and is31fl32xx_software_shutdown(). > - Added 4th patch to replace the now-redundant leds-sn3218. > > [1] https://lkml.org/lkml/2016/3/2/1004 > [2] http://www.spinics.net/lists/linux-leds/msg05564.html > > David Rivshin (4): > DT: Add vendor prefix for Integrated Silicon Solutions Inc. > DT: leds: Add binding for the ISSI IS31FL32xx family of LED > controllers > leds: Add driver for the ISSI IS31FL32xx family of LED controllers > leds: Add SN3218 and SN3216 support to the IS31FL32XX driver > > .../devicetree/bindings/leds/leds-is31fl32xx.txt | 52 +++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/leds/Kconfig | 8 + > drivers/leds/Makefile | 1 + > drivers/leds/leds-is31fl32xx.c | 508 +++++++++++++++++++++ > 5 files changed, 570 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt > create mode 100644 drivers/leds/leds-is31fl32xx.c >
| |