lkml.org 
[lkml]   [2016]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 3/3] ARM: dts: apq8064: add ahci ports-implemented mask
    Date
    This patch adds new ports-implemented mask, which is required to get
    achi working on the mainline. Without this patch value read from
    PORTS_IMPL register which is zero would not enable any ports for
    software to use.

    Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    ---
    arch/arm/boot/dts/qcom-apq8064.dtsi | 3 ++-
    1 file changed, 2 insertions(+), 1 deletion(-)

    diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
    index 252b310..71d6fcb 100644
    --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
    +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
    @@ -696,7 +696,7 @@
    };

    sata0: sata@29000000 {
    - compatible = "generic-ahci";
    + compatible = "generic-ahci", "qcom,apq8064-ahci";
    status = "disabled";
    reg = <0x29000000 0x180>;
    interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
    @@ -718,6 +718,7 @@

    phys = <&sata_phy0>;
    phy-names = "sata-phy";
    + ports-implemented = <0x1>;
    };

    /* Temporary fixed regulator */
    --
    2.5.0
    \
     
     \ /
      Last update: 2016-03-31 19:41    [W:8.254 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site