lkml.org 
[lkml]   [2016]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Tegra boots failing due to as3722 I/O errors
On Wed, Mar 30, 2016 at 02:15:16PM +0100, Jon Hunter wrote:

> On second thoughts, is this the correct way to fix this? I see that
> there are some operators defined for get/set_bypass for a regulator and
> these are not specified for LDO6 either. However, even if they were I
> don't believe this will fix the problem alone.

If this is trying to implement bypass support it should use bypass
support (and the other things doing this fixed to do so).

> The failure is caused by _regulator_get_voltage() returning an error.
> This function does not check if the regulator is bypassed, but I am
> wondering if it should and then return the bypass voltage?

Yes, like we already do for switches. I'll send an untested patch
shortly.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-03-30 19:21    [W:0.247 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site