Messages in this thread Patch in this message | | | From | Yunhui Cui <> | Subject | [PATCH v3 4/4] mtd: spi-nor: Disable Micron flash HW protection | Date | Thu, 3 Mar 2016 14:54:04 +0800 |
| |
From: Yunhui Cui <yunhui.cui@nxp.com>
For Micron family ,The status register write enable/disable bit, provides hardware data protection for the device. When the enable/disable bit is set to 1, the status register nonvolatile bits become read-only and the WRITE STATUS REGISTER operation will not execute.
Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> --- drivers/mtd/spi-nor/spi-nor.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index ed0c19c..917f814 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -39,6 +39,7 @@ #define SPI_NOR_MAX_ID_LEN 6 #define SPI_NOR_MAX_ADDR_WIDTH 4 +#define SPI_NOR_MICRON_WRITE_ENABLE 0x7f struct flash_info { char *name; @@ -1238,6 +1239,14 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) write_sr(nor, 0); } + if (JEDEC_MFR(info) == SNOR_MFR_MICRON) { + ret = read_sr(nor); + ret &= SPI_NOR_MICRON_WRITE_ENABLE; + + write_enable(nor); + write_sr(nor, ret); + } + if (!mtd->name) mtd->name = dev_name(dev); mtd->priv = nor; -- 2.1.0.27.g96db324
| |