lkml.org 
[lkml]   [2016]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/17] dt-bindings: Add PLX Technology RPS IRQ Controller bindings
Date
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/interrupt-controller/plxtech,rps-irq.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt
new file mode 100644
index 0000000..db117a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt
@@ -0,0 +1,17 @@
+PLX Technology OXNAS SoCs Family RPS Interrupt Controller
+=========================================================
+
+Required properties:
+- compatible: Should be "plxtech,nas782x-rps"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Should be 1
+
+example:
+
+intc: interrupt-controller@0 {
+ compatible = "plxtech,nas782x-rps";
+ interrupt-controller;
+ reg = <0 0x200>;
+ #interrupt-cells = <1>;
+};
--
1.9.1
\
 
 \ /
  Last update: 2016-03-03 13:21    [W:0.414 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site