lkml.org 
[lkml]   [2016]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 10/11] ARM: DRA7: hwmod: Add data for McASP1/2/4/5/6/7/8
From
Date
Hi Paul,

On 03/01/2016 07:01 PM, Paul Walmsley wrote:
>>> 2. The patch sets HWMOD_SWSUP_SIDLE for McASP1 and 2, but doesn't set it
>>> for McASP4-8. Could you please confirm that this is intentional, and if
>>> so, why? The descriptions of the MODULEMODE fields in SPRUHZ6 look
>>> identical.
>>
>> I need to confirm this, but all McASP should have the same set of flags.
>
> OK. Looking at McASP3 data this morning, they probably shouldn't need
> HWMOD_SWSUP_SIDLE, but probably all need
>
> .modulemode = MODULEMODE_SWCTRL,
>
>>> 3. Can McASP1,2,3 bus-master onto the L3? If so, then there should be
>>> "dra7xx_mcasp1__l3_main_1"-style links to indicate this.
>>
>> I need to check this, but I don't think McASP1,2,3 can be bus-master onto L3.
>
> OK. When you get back, maybe doublecheck this - it looks to me from
> SPRUHZ6 that McASP1-3 have built-in DMA controllers.

They are only targets on L3. Not sure about the built-in DMA controller

>
>> I can resend the series next week as I'm out of office this week.
>
> That's fine. It's most likely v4.7 material at this point.
>
>
> - Paul
>


--
Péter

\
 
 \ /
  Last update: 2016-03-03 13:01    [W:0.046 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site