lkml.org 
[lkml]   [2016]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 05/12] ARM: dts: dragonboard-600c: add pmic regulator supplies
From
Date


On 29/03/16 15:37, Bjorn Andersson wrote:
> On Wed 23 Mar 12:47 PDT 2016, Srinivas Kandagatla wrote:
>
>> This patch adds pmic regulator supplies connected on the board.
>> Rest of the invidual regulators would be added as and when required by
>> the devices.
>>
>
> I do think we should try to fill them all out, before they are needed.
> Especially so that people don't take the easy path of just copying
> pieces from some other 8064 dts to get going...

I agree, But I want to make sure that all the regulators entires are
tested before we actually see them in mainline. This would also deter
someone adding nodes without any regulator dependencies.
>
> But we can do that in a follow up if you prefer.
>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
thanks for the Ack.

--srini
>
> Regards,
> Bjorn
>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>> .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 55 ++++++++++++++++++++++
>> 1 file changed, 55 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
>> index e96aab6..0a0bcfe 100644
>> --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
>> +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
>> @@ -9,7 +9,62 @@
>> serial1 = &gsbi1_serial;
>> };
>>
>> + regulators {
>> + compatible = "simple-bus";
>> + vph: regulator-fixed@1 {
>> + compatible = "regulator-fixed";
>> + regulator-min-microvolt = <4500000>;
>> + regulator-max-microvolt = <4500000>;
>> + regulator-name = "VPH";
>> + regulator-type = "voltage";
>> + regulator-boot-on;
>> + };
>> + };
>> +
>> soc {
>> + rpm@108000 {
>> + regulators {
>> + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
>> + vdd_l3_15_17-supply = <&vph>;
>> + vdd_l4_14-supply = <&vph>;
>> + vdd_l5_8_16-supply = <&vph>;
>> + vdd_l6_7-supply = <&vph>;
>> + vdd_l9_11-supply = <&vph>;
>> + vdd_l10_22-supply = <&vph>;
>> + vdd_l21_23_29-supply = <&vph>;
>> + vdd_l24-supply = <&pm8921_s1>;
>> + vdd_l25-supply = <&pm8921_s1>;
>> + vdd_l26-supply = <&pm8921_s7>;
>> + vdd_l27-supply = <&pm8921_s7>;
>> + vdd_l28-supply = <&pm8921_s7>;
>> + vin_lvs1_3_6-supply = <&pm8921_s4>;
>> + vin_lvs2-supply = <&pm8921_s1>;
>> + vin_lvs4_5_7-supply = <&pm8921_s4>;
>> +
>> + s1 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1225000>;
>> + regulator-max-microvolt = <1225000>;
>> + qcom,switch-mode-frequency = <3200000>;
>> + bias-pull-down;
>> + };
>> +
>> + s4 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + qcom,switch-mode-frequency = <3200000>;
>> + bias-pull-down;
>> + regulator-always-on;
>> + };
>> +
>> + s7 {
>> + regulator-min-microvolt = <1300000>;
>> + regulator-max-microvolt = <1300000>;
>> + qcom,switch-mode-frequency = <3200000>;
>> + };
>> + };
>> + };
>> +
>> gsbi@12440000 {
>> status = "okay";
>> qcom,mode = <GSBI_PROT_UART_W_FC>;
>> --
>> 2.5.0
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2016-03-29 17:21    [W:0.097 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site