lkml.org 
[lkml]   [2016]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 3/6] Documentation: DT: vdma: update binding doc for AXI DMA
    Date
    This patch updates the device-tree binding doc for
    adding support for AXI DMA.

    Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
    ---
    Changes for v2:
    ---> Modified commit message as suggested by Vinod.
    ---> Moved the patch to forward in the series as suggested by vinod.

    .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 22 +++++++++++++++++++++-
    1 file changed, 21 insertions(+), 1 deletion(-)

    diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
    index a86737c..5841421 100644
    --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
    +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
    @@ -3,8 +3,13 @@ It can be configured to have one channel or two channels. If configured
    as two channels, one is to transmit to the video device and another is
    to receive from the video device.

    +Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
    +target devices. It can be configured to have one channel or two channels.
    +If configured as two channels, one is to transmit to the device and another
    +is to receive from the device.
    +
    Required properties:
    -- compatible: Should be "xlnx,axi-vdma-1.00.a"
    +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a"
    - #dma-cells: Should be <1>, see "dmas" property below
    - reg: Should contain VDMA registers location and length.
    - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
    @@ -59,6 +64,21 @@ axi_vdma_0: axivdma@40030000 {
    } ;
    } ;

    +axi_dma_0: axidma@40400000 {
    + compatible = "xlnx,axi-dma-1.00.a";
    + #dma-cells = <1>;
    + reg = < 0x40400000 0x10000 >;
    + dma-channel@40400000 {
    + compatible = "xlnx,axi-dma-mm2s-channel";
    + interrupts = < 0 59 4 >;
    + xlnx,datawidth = <0x40>;
    + } ;
    + dma-channel@40400030 {
    + compatible = "xlnx,axi-dma-s2mm-channel";
    + interrupts = < 0 58 4 >;
    + xlnx,datawidth = <0x40>;
    + } ;
    +} ;

    * DMA client

    --
    2.1.2
    \
     
     \ /
      Last update: 2016-03-27 20:21    [W:4.245 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site