lkml.org 
[lkml]   [2016]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v3 01/16] dt: davinci: use proper address after @
    From
    Date
    Hello.

    On 03/25/2016 02:51 AM, David Lechner wrote:

    > TI has been using the physical address in DT after the @ in device nodes.
    > The device tree convention is to use the same address that is used for
    > the reg property. This updates all davinci DT files to use the proper
    > convention.
    >
    > Signed-off-by: David Lechner <david@lechnology.com>
    [...]

    > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
    > index 226cda7..4294849 100644
    > --- a/arch/arm/boot/dts/da850.dtsi
    > +++ b/arch/arm/boot/dts/da850.dtsi
    > @@ -15,7 +15,7 @@
    > #address-cells = <1>;
    > #size-cells = <1>;
    > ranges;
    > - intc: interrupt-controller {
    > + intc: interrupt-controller@fffee000 {
    > compatible = "ti,cp-intc";
    > interrupt-controller;
    > #interrupt-cells = <1>;
    > @@ -23,7 +23,7 @@
    > reg = <0xfffee000 0x2000>;
    > };
    > };
    > - soc {
    > + soc@1c00000 {

    This node doesn't have the "reg" prop.

    [...]

    MBR, Sergei

    \
     
     \ /
      Last update: 2016-03-25 15:21    [W:4.260 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site