lkml.org 
[lkml]   [2016]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFT PATCH 2/2] Revert "usb: dwc2: Fix probe problem on bcm2835"
From
Date
> On 19.03.2016, at 10:52, Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> Hi,
>
>> Martin Sperl <kernel@martin.sperl.org> hat am 19. März 2016 um 08:44
>> geschrieben:
>>
>>
>>
>>> On 19.03.2016, at 03:17, Eric Anholt <eric@anholt.net> wrote:
>>>
>>> Stefan Wahren <stefan.wahren@i2se.com> writes:
>>>
>>>> Hi Eric,
>>>> hi Martin,
>>>>
>>>>> John Youn <John.Youn@synopsys.com> hat am 16. März 2016 um 19:28
>>>>> geschrieben:
>>>>>
>>>>>
>>>>> On 3/10/2016 11:14 AM, John Youn wrote:
>>>>>> On 3/9/2016 11:06 AM, Doug Anderson wrote:
>>>>>>>
>>>>>>> John: it's pretty clear that there's something taking almost exactly
>>>>>>> 10ms on my system and almost exactly 50ms on Stefan's system. Is
>>>>>>> there some register we could poll to see when this process is done?
>>>>>>> ...or can we look at the dwc2 revision number / feature register and
>>>>>>> detect how long to delay?
>>>>>>>
>>
>> Maybe this difference is related to overclocking settings in the firmware?
>>
>>>>>
>>>>> 1. What is the AHB Clock frequency? Is the AHB Clock gated during
>>>>> Reset?
>>>
>>> Low confidence here as I'm tracing lines across a ton of modules, but it
>>> looks like it comes from the USB AXI clock in peri_image, which is a
>>> gate on the normal 250Mhz APB clock, but nothing should be touching that
>>> gate register as part of USB reset as far as I know.
>>>
>> Isn’t it possible that this clock (probably BCM2835_CLOCK_VPU) is
>> changed by the firmware due to overclocking settings in /boot/config.txt?
>
> i don't use any overclocking settings.
>
> Are you able to reproduce the behavior on your Pi?

I did not have any problems with USB recently (using 4.5),
so I would not have any idea how to reproduce it.

Note that I am using it with an AXIS USB-ethernet dongle plus USB-stick
all the time on my Compute Module connected via a tiny hub,
so I wonder if that qualifies as being able to trigger the issue...

Martin

\
 
 \ /
  Last update: 2016-03-19 12:01    [W:5.816 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site