lkml.org 
[lkml]   [2016]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v5 0/2] power: reset: support for Atmel alternative Shutdown Controller
    Date
    This is a series to add driver for a new Atmel Shutdown Controller. This new IP
    is extensible and some features will be added later (see the TODO section).
    Its extensible nature led to write a new binding so that wake-up sources can be
    described easily.

    Changes in v5:
    - Instead of the "alternate shdwc" we choose a more specific
    "sama5d2-compatible shdwc" wording. Change file name, in Kconfig, and the
    MAINTAINERS file:
    at91-shdwc.c -> at91-sama5d2_shdwc.c
    "ATMEL AT91 Alternative Shutdown Controller" -> "ATMEL AT91 SAMA5D2-Compatible
    Shutdown Controller"
    - fix one indentation mismatch

    Changes in v4:
    - change property to debounce-delay-us so that we can use a generic property
    and we can have the unit explicitly included it the name according to
    Documentation/devicetree/bindings/property-units.txt.
    - move to atmel,wakeup-active-high boolean property instead of a "high", "low"
    string comparison.
    - fix warning found by 0-day robot: large integer implicitly truncated to
    unsigned type [-Woverflow]
    - move to the property debounce-delay-us
    - move to atmel,wakeup-active-high boolean
    - add entry in MAINTAINERS file

    Changes in v3:
    - get and use slow clock and specify its handler in binding
    - add the slow clock handle as the IP uses it
    - remove useless protection at the beginning of pm_power_off handler
    - allow to compile it as a module
    - add COMPILE_TEST directive in Kconfig
    - update description in file header

    Changes in v2:
    - add MODULE_DEVICE_TABLE as advised by Sebastian Reichel
    - review indentation and braces to correct errors pointed out by checkpatch

    Nicolas Ferre (2):
    ARM: dts: at91: shdwc binding: add new shutdown controller
    documentation
    power: reset: at91-shdwc: add new shutdown controller driver

    .../devicetree/bindings/arm/atmel-at91.txt | 59 +++++
    MAINTAINERS | 5 +
    drivers/power/reset/Kconfig | 8 +
    drivers/power/reset/Makefile | 1 +
    drivers/power/reset/at91-sama5d2_shdwc.c | 282 +++++++++++++++++++++
    5 files changed, 355 insertions(+)
    create mode 100644 drivers/power/reset/at91-sama5d2_shdwc.c

    --
    2.1.3

    \
     
     \ /
      Last update: 2016-03-16 14:41    [W:7.738 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site