lkml.org 
[lkml]   [2016]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] dmaengine: xilinx_vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine
Date
This patch updates the device-tree binding doc for
adding support for AXI CDMA.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
.../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index 3d134a5..f288175 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -8,8 +8,12 @@ target devices. It can be configured to have one channel or two channels.
If configured as two channels, one is to transmit to the device and another
is to receive from the device.

+Xilinx AXI CDMA engine, it does transfers between memory-mapped source
+address and a memory-mapped destination address.
+
Required properties:
- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a"
+ or "xlnx,axi-cdma-1.00.a"
- #dma-cells: Should be <1>, see "dmas" property below
- reg: Should contain VDMA registers location and length.
- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
@@ -76,6 +80,17 @@ axi_dma_0: axidma@40400000 {
} ;
} ;

+axi_cdma_0: axicdma@7e200000 {
+ compatible = "xlnx,axi-cdma-1.00.a";
+ #dma-cells = <1>;
+ reg = < 0x7e200000 0x10000 >;
+ dma-channel@7e200000 {
+ compatible = "xlnx,axi-vdma-mm2s-channel";
+ interrupts = < 0 55 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+} ;
+
* DMA client

Required properties:
--
2.1.2
\
 
 \ /
  Last update: 2016-03-15 19:01    [W:0.250 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site