lkml.org 
[lkml]   [2016]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 13/13] thermal: convert ti-thermal to use devm_thermal_zone_of_sensor_register
From
Date
Hi Eduardo,

On Thursday 10 March 2016 03:05 AM, Eduardo Valentin wrote:
> This changes the driver to use the devm_ version
> of thermal_zone_of_sensor_register and cleans
> up the local points and unregister calls.
>

Boot tested on dra7xx-evm, dra72x-evm, pandaboard-es.
Also checked the thermal sysfs entries on am57xx-beagle-x15.

Tested-by: Keerthy <j-keerthy@ti.com>


> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-omap@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
> ---
> drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> index b213a12..15c0a9a 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> @@ -337,7 +337,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
> return -EINVAL;
>
> /* in case this is specified by DT */
> - data->ti_thermal = thermal_zone_of_sensor_register(bgp->dev, id,
> + data->ti_thermal = devm_thermal_zone_of_sensor_register(bgp->dev, id,
> data, &ti_of_thermal_ops);
> if (IS_ERR(data->ti_thermal)) {
> /* Create thermal zone */
> @@ -368,9 +368,6 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
> if (data && data->ti_thermal) {
> if (data->our_zone)
> thermal_zone_device_unregister(data->ti_thermal);
> - else
> - thermal_zone_of_sensor_unregister(bgp->dev,
> - data->ti_thermal);
> }
>
> return 0;
>

\
 
 \ /
  Last update: 2016-03-15 14:01    [W:0.155 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site