lkml.org 
[lkml]   [2016]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] rtc: s3c: Don't print an error on probe deferral
From
Date
On 15.03.2016 10:38, Javier Martinez Canillas wrote:
> The clock and source clock looked up by the driver may not be available
> just because the clock controller driver was not probed yet so printing
> an error in this case is not correct and only adds confusion to users.
>
> However, knowing that a driver's probe was deferred may be useful so it
> can be printed as a debug information.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
> ---
>
> Changes in v3:
> - Change debug messages again as suggested by Joe Perches.
>
> Changes in v2:
> - Improve debug messages as suggested by Joe Perches.
>
> drivers/rtc/rtc-s3c.c | 19 ++++++++++++++-----
> 1 file changed, 14 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
> index ffb860d18701..d01ad7e8078e 100644
> --- a/drivers/rtc/rtc-s3c.c
> +++ b/drivers/rtc/rtc-s3c.c
> @@ -501,18 +501,27 @@ static int s3c_rtc_probe(struct platform_device *pdev)
>
> info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
> if (IS_ERR(info->rtc_clk)) {
> - dev_err(&pdev->dev, "failed to find rtc clock\n");
> - return PTR_ERR(info->rtc_clk);
> + ret = PTR_ERR(info->rtc_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "failed to find rtc clock\n");
> + else
> + dev_dbg(&pdev->dev, "probe deferred due to missing rtc clk\n");
> + return ret;
> }
> clk_prepare_enable(info->rtc_clk);
>
> if (info->data->needs_src_clk) {
> info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
> if (IS_ERR(info->rtc_src_clk)) {
> - dev_err(&pdev->dev,
> - "failed to find rtc source clock\n");
> + ret = PTR_ERR(info->rtc_src_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev,
> + "failed to find rtc source clock\n");
> + else
> + dev_dbg(&pdev->dev,
> + "probe deferred due to missing rtc src clk\n");
> clk_disable_unprepare(info->rtc_clk);
> - return PTR_ERR(info->rtc_src_clk);
> + return ret;
> }
> clk_prepare_enable(info->rtc_src_clk);
> }
>

The error path starts looking complicated. This has now 4 indentation
levels...

I agree for removal of error in case of probe deferral because it might
be misleading but I don't see much benefit of a debug message.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2016-03-15 03:21    [W:0.087 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site