lkml.org 
[lkml]   [2016]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [RFC PATCH v2 2/3] PCI: hisi: Make the HiSilicon PCIe host controller ECAM compliant
Date
> -----Original Message-----
> From: Arnd Bergmann [mailto:arnd@arndb.de]
> Sent: 08 February 2016 13:48
> To: linux-arm-kernel@lists.infradead.org
> Cc: Gabriele Paoloni; Guohanjun (Hanjun Guo); Wangzhou (B); liudongdong
> (C); Linuxarm; qiujiang; bhelgaas@google.com;
> Lorenzo.Pieralisi@arm.com; tn@semihalf.com; linux-pci@vger.kernel.org;
> linux-kernel@vger.kernel.org; xuwei (O); linux-acpi@vger.kernel.org;
> jcm@redhat.com; zhangjukuo; Liguozhu (Kenneth)
> Subject: Re: [RFC PATCH v2 2/3] PCI: hisi: Make the HiSilicon PCIe host
> controller ECAM compliant
>
> On Monday 08 February 2016 12:41:03 Gabriele Paoloni wrote:
> > From: gabriele paoloni <gabriele.paoloni@huawei.com>
> >
> > This patch modifies the current Hip05/Hip06 PCIe host controller
> > driver to make it ECAM compliant. This is needed in preparation
> > for the ACPI based driver to allow both DT and ACPI drivers to
> > use the same BIOS (that configure the Designware iATUs).
> >
> > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
> > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
> >
>
> Doesn't this break backwards compatibility?

Well Hip05/Hip06 SoCs are used into evaluation boards
For the Estuary project.

https://github.com/hisilicon/estuary

As this new driver gets upstream we'll merge this new driver into estuary
and release a new version of the firmware to support it.

>
> I think you need to use a new compatible string in the firmware
> if you change the register layout, and then change the driver
> to support both the old and the new layout.

You are right, for some reason in this patchset I missed the Documentation
update that I posted in the previous one, i.e.:

--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -23,8 +23,8 @@ Optional properties:
Hip05 Example (note that Hip06 is the same except compatible):
pcie@0xb0080000 {
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
- reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
- reg-names = "rc_dbi", "config";
+ reg = <0 0xb0080000 0 0x10000>, <0x220 0x00100000 0 0x0f00000>;
+ reg-names = "rc_dbi", "ecam-cfg";

I will fix this in v3

Thanks

Gab

>
> Arnd

\
 
 \ /
  Last update: 2016-02-08 17:41    [W:0.205 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site