Messages in this thread Patch in this message | | | From | Mark Brown <> | Date | Wed, 03 Feb 2016 18:11:58 +0000 | Subject | Applied "regulator: axp20x: Use linear voltage ranges for AXP20X LDO4" to the regulator tree |
| |
The patch
regulator: axp20x: Use linear voltage ranges for AXP20X LDO4
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 13d57e64352a5d3457d7782bc2f8b576e12b05f3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai <wens@csie.org> Date: Tue, 2 Feb 2016 18:27:38 +0800 Subject: [PATCH] regulator: axp20x: Use linear voltage ranges for AXP20X LDO4
AXP20X datasheet lists the possible voltage settings for LDO4, so it was implemented using a voltage table. Upon closer examination, the valid voltages can be mapped into 3 linear ranges.
Move AXP20X LDO4 to use linear ranges. The supporting code can be reused with later AXP8xx PMICs, which have a number of regulators that have 2 linear ranges.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/axp20x-regulator.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index fafaaa8eb8b3..7d29893f833c 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -106,8 +106,8 @@ .ops = &axp20x_ops_fixed \ } -#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \ - _ereg, _emask) \ +#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \ + _vreg, _vmask, _ereg, _emask) \ [_family##_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ @@ -115,30 +115,25 @@ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = _family##_##_id, \ - .n_voltages = ARRAY_SIZE(_table), \ + .n_voltages = (_n_voltages), \ .owner = THIS_MODULE, \ .vsel_reg = (_vreg), \ .vsel_mask = (_vmask), \ .enable_reg = (_ereg), \ .enable_mask = (_emask), \ - .volt_table = (_table), \ - .ops = &axp20x_ops_table, \ + .linear_ranges = (_ranges), \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .ops = &axp20x_ops_range, \ } -static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, - 1700000, 1800000, 1900000, 2000000, 2500000, - 2700000, 2800000, 3000000, 3100000, 3200000, - 3300000 }; - static struct regulator_ops axp20x_ops_fixed = { .list_voltage = regulator_list_voltage_linear, }; -static struct regulator_ops axp20x_ops_table = { +static struct regulator_ops axp20x_ops_range = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .list_voltage = regulator_list_voltage_table, - .map_voltage = regulator_map_voltage_ascend, + .list_voltage = regulator_list_voltage_linear_range, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -159,6 +154,12 @@ static struct regulator_ops axp20x_ops_sw = { .is_enabled = regulator_is_enabled_regmap, }; +static const struct regulator_linear_range axp20x_ldo4_ranges[] = { + REGULATOR_LINEAR_RANGE(1250000, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(1300000, 0x1, 0x8, 100000), + REGULATOR_LINEAR_RANGE(2500000, 0x9, 0xf, 100000), +}; + static const struct regulator_desc axp20x_regulators[] = { AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), @@ -169,8 +170,9 @@ static const struct regulator_desc axp20x_regulators[] = { AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), - AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, - AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), + AXP_DESC_RANGES(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_ranges, + 16, AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, + 0x08), AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), -- 2.7.0.rc3
| |