lkml.org 
[lkml]   [2016]   [Feb]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/4] bcm2835 SDHOST controller
From
Date

> On 27.02.2016, at 00:05, Eric Anholt <eric@anholt.net> wrote:
>
> Here's a series to enable the SDHOST controller. It gives us better
> performance than our old sdhci-bcm2835.c. The downstream Raspberry Pi
> kernel appears to be using this controller by default at this point.
>
> I've tried to do some testing on it (mounting filesystem,
> reading/writing files, speed tests), but I'm not sure what a good
> testing regimen for storage drivers would be.
>
> Eric Anholt (4):
> dt-bindings: Add binding for brcm,bcm2835-sdhost.
> mmc: bcm2835-sdhost: Add new driver for the internal SD controller.
> ARM: bcm2835: Include SDHOST in the device tree.
> ARM: bcm2835: Enable SDHOST by default.

This patchset misses defconfig changes to enable
the new sdhost driver.

So we end up with a default kernel
without the sdhost driver compiled in
but with sdhost enabled in the default device-tree (patch4)
resulting in a system that does not boot.

Thanks,
Martin

\
 
 \ /
  Last update: 2016-02-29 11:41    [W:1.370 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site