Messages in this thread Patch in this message | | | From | Maarten ter Huurne <> | Subject | [PATCH 6/7] regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9 | Date | Sun, 28 Feb 2016 16:53:28 +0100 |
| |
The documentation lists both 1.8V and 3.3V for this regulator output, but 3.3V is mentioned more often and also matches what JZ4770 and JZ4780 expect as an input.
Note that the voltage of REG9 is not programmable, so this commit only changes the voltage reported in sysfs and debugfs, not the actual output voltage of the hardware.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> --- drivers/regulator/act8865-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index cdfe082..ac6956d 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -267,7 +267,7 @@ static const struct regulator_desc act8600_regulators[] = { .ops = &act8865_ldo_ops, .type = REGULATOR_VOLTAGE, .n_voltages = 1, - .fixed_uV = 1800000, + .fixed_uV = 3300000, .enable_reg = ACT8600_LDO910_CTRL, .enable_mask = ACT8865_ENA, .owner = THIS_MODULE, -- 2.6.2
| |