lkml.org 
[lkml]   [2016]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] rtc: rtc-pic32: Add PIC32 real time clock driver
On 25/02/2016 at 09:23:55 -0700, Joshua Henderson wrote :
> On 02/24/2016 03:25 PM, Alexandre Belloni wrote:
> > Hi,
> >
> > On 19/02/2016 at 11:09:45 -0700, Joshua Henderson wrote :
> >> +static int pic32_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
> >> +{
> >> + struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
> >> + void __iomem *base = pdata->reg_base;
> >> + unsigned int tries = 0;
> >> +
> >> + clk_enable(pdata->clk);
> >> +
> >> + do {
> >> + rtc_tm->tm_hour = readb(base + PIC32_RTCHOUR);
> >> + rtc_tm->tm_min = readb(base + PIC32_RTCMIN);
> >> + rtc_tm->tm_mon = readb(base + PIC32_RTCMON);
> >> + rtc_tm->tm_mday = readb(base + PIC32_RTCDAY);
> >> + rtc_tm->tm_year = readb(base + PIC32_RTCYEAR);
> >> + rtc_tm->tm_sec = readb(base + PIC32_RTCSEC);
> >> +
> >> + /*
> >> + * The only way to work out whether the system was mid-update
> >> + * when we read it is to check the second counter, and if it
> >> + * is zero, then we re-try the entire read.
> >> + */
> >> + tries = 1;
> >> + } while (rtc_tm->tm_sec == 0 && tries < 2);
> >> +
> >
> > This doesn't seem right. It will wait up to a second as tries will
> > always be less than 2, this is probably not what you want.
>
> Dang good catch. When fixed, it will work as expected:
>
> # hwclock
> tries 1
> Sun Oct 17 19:23:59 2010 0.000000 seconds
> # hwclock
> tries 1
> tries 2
> Sun Oct 17 19:24:00 2010 0.000000 seconds
> # hwclock
> tries 1
> Sun Oct 17 19:24:01 2010 0.000000 seconds
>

Sure, just send v3, I'll apply it right away ;)


--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-02-25 18:41    [W:0.049 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site