lkml.org 
[lkml]   [2016]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] thermal: change "hysteresis" as optional property
Date
The property "hysteresis" is mandatory for trip points, so if without
it the thermal zone cannot register successfully. But "hysteresis" is
ignored in the thermal subsystem and only inquired by several thermal
sensor drivers.

So change "hysteresis" as optional properties.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
Documentation/devicetree/bindings/thermal/thermal.txt | 9 +++++----
drivers/thermal/of-thermal.c | 9 ++++-----
2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 41b817f..7d79e77 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -89,10 +89,6 @@ Required properties:
Type: signed in millicelsius.
Size: one cell

-- hysteresis: A low hysteresis value on temperature property (above).
- Type: unsigned This is a relative value, in millicelsius.
- Size: one cell
-
- type: a string containing the trip type. Expected values are:
"active": A trip point to enable active cooling
"passive": A trip point to enable passive cooling
@@ -100,6 +96,11 @@ Required properties:
"critical": Hardware not reliable.
Type: string

+Optional properties:
+- hysteresis: A low hysteresis value on temperature property (above).
+ Type: unsigned This is a relative value, in millicelsius.
+ Size: one cell
+
* Cooling device maps

The cooling device maps node is a node to describe how cooling devices
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 9043f8f..ab05500 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -689,11 +689,10 @@ static int thermal_of_populate_trip(struct device_node *np,
trip->temperature = prop;

ret = of_property_read_u32(np, "hysteresis", &prop);
- if (ret < 0) {
- pr_err("missing hysteresis property\n");
- return ret;
- }
- trip->hysteresis = prop;
+ if (ret < 0)
+ pr_warning("missing hysteresis property\n");
+ else
+ trip->hysteresis = prop;

ret = thermal_of_get_trip_type(np, &trip->type);
if (ret < 0) {
--
1.9.1
\
 
 \ /
  Last update: 2016-02-26 05:41    [W:0.136 / U:2.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site