lkml.org 
[lkml]   [2016]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mmc: sdhci-tegra: Set DMA mask
From
Date
On 02/24/2016 02:11 AM, Alexandre Courbot wrote:
> On T210, the sdhci controller can address more than 32 bits of address
> space. Failing to express this fact results in the use of bounce
> buffers and affects performance.
>
> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
> ---
> I am pretty sure this one is wrong in some way, but just to get the ball
> rolling as the use of bounce buffers is currently quite heavy on Jetson TX1.
>
> Thierry, Stephen, could you confirm that I got the DMA masks correctly? I
> am not sure about the actual addressable size on TX1, and also suspect TK1 can
> also address more than 32 bits.

I don't actually know what the HW capabilities are. You had best track
down one of NVIDIA's HW designers/integrators; hopefully the can provide
all kinds of gory details.

One thing I will say: in U-Boot, we deliberately clip usable RAM size to
2GiB so that the PA of all RAM fits into 32 bits, specifically because
of IO controllers that can only address 32 bits. It is possible this was
only required on earlier chips and T210 fixed it though; I don't know.
Equally, I suppose the restriction might only apply to a subset of IO
controllers (USB would be another one relevant to U-Boot).

\
 
 \ /
  Last update: 2016-02-24 18:41    [W:3.976 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site