lkml.org 
[lkml]   [2016]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/3] input: cygnus-update touchscreen dt node document
From
Date
My comments below

On 16-02-22 11:36 AM, Dmitry Torokhov wrote:
> On Fri, Feb 19, 2016 at 11:43:50AM +0530, Raveendra Padasalagi wrote:
>> On Thu, Feb 18, 2016 at 8:06 PM, Rob Herring <robh@kernel.org> wrote:
>>> On Wed, Feb 17, 2016 at 03:13:44PM +0530, Raveendra Padasalagi wrote:
>>>> In Cygnus SOC touch screen controller registers are shared
>>>> with ADC and flex timer. Using readl/writel could lead to
>>>> race condition. So touch screen driver is enhanced to support
>>>>
>>>> 1. If touchscreen register's are not shared. Register access
>>>> is handled through readl/writel if "brcm,iproc-touchscreen"
>>>> compatible is provided in touchscreen dt node. This will help
>>>> for future SOC's if comes with dedicated touchscreen IP register's.
>>>>
>>>> 2. If touchscreen register's are shared with other IP's, register
>>>> access is handled through syscon framework API's to take care of
>>>> mutually exclusive access. This feature can be enabled by selecting
>>>> "brcm,iproc-touchscreen-syscon" compatible string in the touchscreen
>>>> dt node.
>>>>
>>>> Hence touchscreen dt node bindings document is updated to take care
>>>> of above changes in the touchscreen driver.
>>>>
>>>> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
>>>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>>>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>>>> ---
>>>> .../input/touchscreen/brcm,iproc-touchscreen.txt | 57 +++++++++++++++++++---
>>>> 1 file changed, 51 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
>>>> index 34e3382..f530c25 100644
>>>> --- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
>>>> +++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
>>>> @@ -1,12 +1,30 @@
>>>> * Broadcom's IPROC Touchscreen Controller
>>>>
>>>> Required properties:
>>>> -- compatible: must be "brcm,iproc-touchscreen"
>>>> -- reg: physical base address of the controller and length of memory mapped
>>>> - region.
>>>> +- compatible: should be one of
>>>> + "brcm,iproc-touchscreen"
>>>> + "brcm,iproc-touchscreen-syscon"
>>>
>>> More specific and this is not how you do syscon. Either the block is or
>>> isn't. You can't have it both ways.
>>
>> Existing driver has support for reg, if we modify now to support only syscon
>> then this driver will not work if some one wishes to use previous
>> kernel version's
>> dt and vice versa. Basically this breaks dt compatibility. Is that ok ?
>
> But the issue is that the driver does not actually work correctly with
> direct register access on those systems, since the registers are
> actually shared with other components. I am not quite sure if it is OK
> to break DT binding in this case...

The driver does work correctly with direct register access on those
systems because the other components using those registers are not
active in those systems - so syscon is not needed in those cases.

I'm ok with not containing backwards compatibility though and always
using syscon. There are no deployed systems using older versions of the
upstreamed kernel.
>
> Thanks.
>

Regards,
Scott

\
 
 \ /
  Last update: 2016-02-22 21:21    [W:0.172 / U:1.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site