lkml.org 
[lkml]   [2016]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] spi: master driver to enable RTC on ICPDAS LP-8841
On Mon, Feb 22, 2016 at 04:47:06AM +0300, Sergei Ianovich wrote:
> ICP DAS LP-8841 contains a DS-1302 RTC. This driver provides an SPI
> master which makes the RTC usable. The driver is not supposed to work
> with anything else.

So this is something that is internal to a single chip or something?
I'm slightly unclear from the above if this is or is not a SPI
controller. If it isn't generic the DT should probably just describe
the IP and let the driver create the SPI controller and device if that
is an expedient way of doing things.

> +spi0@901c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "icpdas,spi-lp8841-rtc";
> + reg = <0x901c 0x1>;
> +
> + rtc@0 {
> + compatible = "maxim,rtc-ds1302";
> + reg = <0>;
> + spi-max-frequency = <500000>;
> + spi-3wire;
> + spi-lsb-first;
> + spi-cs-high;
> + };
> +};

This example makes it seem like an actual SPI controller but just one
that's broken/limited?

> +config SPI_LP8841_RTC
> + tristate "ICP DAS LP-8841 SPI Controller for RTC"
> + depends on OF && (MACH_PXA27X_DT || COMPILE_TEST)

Does this need a strict DT dependency or can it build without DT?

> +/*
> + * REVISIT If there is support for SPI_3WIRE and SPI_LSB_FIRST in SPI
> + * GPIO driver, this SPI driver can be replaced by a simple GPIO driver
> + * providing 3 GPIO pins.
> + */

What's the advantage of not doing that? Overall the driver looks fairly
good but it does seem to just implement a straight bitbanging driver
with less flexibility.

> +#ifndef DRIVER_NAME
> +#define DRIVER_NAME "spi_lp8841_rtc"
> +#endif

If you want to use a define for this just use a define for it, don't do
this ifdef stuff.

> +static inline void
> +spidelay(unsigned usec)
> +{
> + usleep_range(usec, usec + 1);
> +}

Just use usleep_range() directly.

> +static void
> +spi_lp8841_rtc_cleanup(struct spi_device *spi)
> +{
> +}

Remove empty functions, if they can be empty the core will support
ignoring them if they are missing.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-02-22 04:21    [W:0.181 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site