lkml.org 
[lkml]   [2016]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v12] Add Mediatek thermal support
On Mon, Nov 30, 2015 at 12:42:30PM +0100, Sascha Hauer wrote:
> This series adds support for the thermal sensors included in the
> MT8173 SoC. Currently only basic temperature reading is supported
> without any interrupt support.
>

Merged v12.

>
> fan: gpio_fan {
> compatible = "gpio-fan";
> gpios = <&pio 24 0>;
> gpio-fan,speed-map = <0 0
> 4500 1>;
> #cooling-cells = <2>;
> };
>
> thermal-zones {
> cpu_thermal: cpu_thermal {
> polling-delay-passive = <1000>; /* milliseconds */
> polling-delay = <1000>; /* milliseconds */
>
> thermal-sensors = <&thermal>;
>
> trips {
> cpu_passive: cpu_passive {
> temperature = <47000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "passive";
> };
>
> cpu_crit {
> temperature = <90000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "critical";
> };
> };
>
> cooling-maps {
> map0 {
> trip = <&cpu_passive>;
> cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
> };
> };

But, as usual, the dt changes go via your machine tree.

You may add my
Acked-by: Eduardo Valentin <edubezval@gmail.com>

in your DT patch.

>

\
 
 \ /
  Last update: 2016-02-18 17:21    [W:0.249 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site