lkml.org 
[lkml]   [2016]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board
From
Date
On Feb 8, 2016, at 4:43 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:
>
> On 11/19, Matthew McClintock wrote:
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
>> + compatible = "qcom,ipq4019";
>> +
>> + clocks {
>> + xo: xo {
>> + compatible = "fixed-clock";
>> + clock-frequency = <48000000>;
>> + #clock-cells = <0>;
>> + };
>> + };
>
> Is there a reason the xo is here and the sleep clk is in the SoC
> dtsi file? Both are board clocks so I would think they would be
> added in the same place.

I’m a little bit confused and I wanted to confirm. I can see the xo clock is on the board itself. However, the sleep_clk is not, can you clarify why they would both be in the same place?

-M

\
 
 \ /
  Last update: 2016-02-16 22:01    [W:0.075 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site