lkml.org 
[lkml]   [2016]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
Date
Hi Wolfram,

> -----Original Message-----
> From: Wolfram Sang [mailto:wsa@the-dreams.de]
> Sent: Saturday, February 13, 2016 12:08 AM
> To: Sricharan R
> Cc: devicetree@vger.kernel.org; linux-arm-msm@vger.kernel.org;
> agross@codeaurora.org; linux-kernel@vger.kernel.org; linux-
> i2c@vger.kernel.org; iivanov@mm-sol.com; galak@codeaurora.org;
> dmaengine@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> andy.gross@linaro.org; ntelkar@codeaurora.org; architt@codeaurora.org
> Subject: Re: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
>
> On Tue, Jan 19, 2016 at 03:32:44PM +0530, Sricharan R wrote:
> > QUP cores can be attached to a BAM module, which acts as a dma engine
> > for the QUP core. When DMA with BAM is enabled, the BAM consumer
> pipe
> > transmitted data is written to the output FIFO and the BAM producer
> > pipe received data is read from the input FIFO.
> >
> > With BAM capabilities, qup-i2c core can transfer more than
> > 256 bytes, without a 'stop' which is not possible otherwise.
> >
> > Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> > Reviewed-by: Andy Gross <andy.gross@linaro.org>
> > Tested-by: Archit Taneja <architt@codeaurora.org>
> > Tested-by: Telkar Nagender <ntelkar@codeaurora.org>
>
> My code checkers found some issues:
>
> SPARSE
> drivers/i2c/busses/i2c-qup.c:555:6: warning: symbol 'qup_sg_set_buf' was
> not declared. Should it be static?
> drivers/i2c/busses/i2c-qup.c:1243:50: warning: dubious: !x & !y
> SMATCH
> drivers/i2c/busses/i2c-qup.c:165 qup_sg_set_buf warn: unused return: s =
> sg_next()
> drivers/i2c/busses/i2c-qup.c:165 qup_sg_set_buf warn: unused return: s =
> sg_next()
> drivers/i2c/busses/i2c-qup.c:1243 qup_i2c_xfer_v2() warn: add some
> parenthesis here?
> CPPCHECK
> drivers/i2c/busses/i2c-qup.c:1243: style: Boolean result is used in
bitwise
> operation. Clarify expression with parentheses.
> SPATCH
> drivers/i2c/busses/i2c-qup.c:1380:2-13: WARNING: Assignment of bool to 0/1
> drivers/i2c/busses/i2c-qup.c:1481:1-13: WARNING: Assignment of bool to 0/1
> CC drivers/i2c/busses/i2c-qup.o
> drivers/i2c/busses/i2c-qup.c:555:6: warning: no previous prototype for
> 'qup_sg_set_buf' [-Wmissing-prototypes] void qup_sg_set_buf(struct
> scatterlist *sg, void *buf, struct qup_i2c_tag *tg,
>
> Can you fix them and resend??

Sorry on this , will resend this patch.

Regards,
Sricharan

\
 
 \ /
  Last update: 2016-02-13 08:21    [W:0.071 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site