lkml.org 
[lkml]   [2016]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 05/10] Input: synaptics-rmi4: Add device tree support for 2d sensors and F11
From
Date
On 02/12/2016 07:47 AM, Rob Herring wrote:
> On Wed, Feb 10, 2016 at 02:24:34PM -0800, Andrew Duggan wrote:
>> 2D sensors have several parameter which can be set in the platform data.
>> This patch adds support for getting those values from devicetree.
>>
>> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
>> ---
>> .../bindings/input/rmi4/rmi_2d_sensor.txt | 56 +++++++++++
>> .../bindings/input/touchscreen/touchscreen.txt | 2 +
>> drivers/input/rmi4/rmi_2d_sensor.c | 108 +++++++++++++++++++++
>> drivers/input/rmi4/rmi_2d_sensor.h | 3 +
>> drivers/input/rmi4/rmi_f11.c | 7 +-
>> 5 files changed, 175 insertions(+), 1 deletion(-)
>> create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
> [...]
>
>> diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
>> index ac23caf..d6674de 100644
>> --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
>> +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
>> @@ -18,6 +18,8 @@ Optional properties for Touchscreens:
>> - touchscreen-inverted-y : Y axis is inverted (boolean)
>> - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
>> Swapping is done after inverting the axis
>> + - touchscreen-mm-x : horizontal length in mm of the touchscreen
>> + - touchscreen-mm-y : vertical length in mm of the touchscreen
> As I mentioned on v3, put the units on the end.

Oh sorry! I see you did mention that in v3 and I must have missed it.

Thanks,
Andrew

> Rob

\
 
 \ /
  Last update: 2016-02-12 18:41    [W:0.058 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site