lkml.org 
[lkml]   [2016]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] SPCR: check bit width for the 16550 UART
From
Date
On Tue, 2016-12-06 at 01:34 -0500, Jon Masters wrote:
> On 12/05/2016 10:55 PM, Duc Dang wrote:
> >
> > On Mon, Dec 5, 2016 at 6:27 PM, Jon Masters <jcm@redhat.com> wrote:
> > >
> > > Hi Duc, all,
> > >
> > > So after regenerating the initrd override (I must have fat fingered)
> > > it is now detecting the correct bit width on boot (attached dmesg log).
> > >
> > > HOWEVER while the console does come up, the use of "earlycon" on the
> > > command line (with no parameters) doesn't result in the early SPCR
> > > console coming up correctly. I see some garbled characters that
> > > suggest the baud (or register access width) is off somewhere.
> > My bad that I did not catch this in the morning. Yes, earlycon does
> > not seems to work as expected. I can see that earlycon parameters
> > seems to be correct, but the bootconsole message does not come out
> > (the following is from 'dmesg')
> >
> > [    0.000000] ACPI: SPCR: console: uart,mmio32,0x1c020000,115200
> > [    0.000000] earlycon: uart0 at MMIO32 0x000000001c020000 (options '115200')
> > [    0.000000] bootconsole [uart0] enabled
> The difference appears to be in the baud rate. When I explicitly specify
> "earlycon=uart8250,mmio32,0x1c021000" no baud is set. When booting with
> the SPCR, the baud is set to 9600 in my case or 115200 in yours. But we
> both know that the base clock on the X-Gene UART is weird. Maybe
> somehow we can explain this through the lack of setting a baud.

BTW, this behavior is same with devicetree.
If you specify a baudrate with earlycon=, the driver tries to set that
baudrate and if you have an 8250 with some non-standard baud clock, then
it will fail. Perhaps SPCR shouldn't pass baud option to setup_earlycon().
Then again, setup_earlycon() has this comment:

 * setup_earlycon - match and register earlycon console
 * @buf: earlycon param string
 *
 * Registers the earlycon console matching the earlycon specified
 * in the param string @buf. Acceptable param strings are of the form
 *    <name>,io|mmio|mmio32|mmio32be,<addr>,<options>
 *    <name>,0x<addr>,<options>
 *    <name>,<options>
 *    <name>
 *
 * Only for the third form does the earlycon setup() method receive the
 * <options> string in the 'options' parameter; all other forms set
 * the parameter to NULL.

That part about the 3rd form doesn't seem to be true. I don't see where
options gets set to NULL for forms other than the third.

>
> I am pondering some more currently. If it's X-Gene specific, let's add
> that to the quirk (and to perhaps a more APM specific SPCR subtype).
>
> Jon.
>

\
 
 \ /
  Last update: 2016-12-07 16:23    [W:0.076 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site