lkml.org 
[lkml]   [2016]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 02/10] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Djtag dts bindings
From
Date


On Monday 19 December 2016 10:01 PM, Rob Herring wrote:
> On Wed, Dec 07, 2016 at 11:55:19AM -0500, Anurup M wrote:
>> From: Tan Xiaojun <tanxiaojun@huawei.com>
>>
>> Add Hisilicon HiP05/06/07 Djtag dts bindings for CPU and IO Die
>>
>> Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
>> Signed-off-by: Anurup M <anurup.m@huawei.com>
>> ---
>> .../devicetree/bindings/arm/hisilicon/djtag.txt | 41 ++++++++++++++++++++++
>> 1 file changed, 41 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
>> new file mode 100644
>> index 0000000..733498e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
>> @@ -0,0 +1,41 @@
>> +The Hisilicon Djtag is an independent component which connects with some other
>> +components in the SoC by Debug Bus. The djtag is available in CPU and IO dies
>> +in the chip. The djtag controls access to connecting modules of CPU and IO
>> +dies.
>> +The various connecting components in CPU die (like L3 cache, L3 cache PMU etc.)
>> +are accessed by djtag during real time debugging. In IO die there are connecting
>> +components like RSA. These components appear as devices atatched to djtag bus.
>> +
>> +Hisilicon HiP05/06 djtag for CPU and HiP05 IO die
>> +Required properties:
>> + - compatible : "hisilicon,hisi-djtag-v1"
> These need SoC specific compatible strings. They probably should
> also include cpu or io in the compatible string. I would expect there
> are things like events, triggers, or component connections for debug
> that are SoC specifc.

Ok. Shall include SoC prefix in compatible string. e.g.
"hisilicon,hip06-djtag-v1".
As the djtag driver handling is same for CPU and IO, I think I don't
need to include
them in the compatible string. Please share your comment.

Thanks,
Anurup

>> + - reg : Register address and size
>> + - scl-id : The Super Cluster ID for CPU or IO die
>> +
>> +Hisilicon HiP06 djtag for IO die and HiP07 djtag for CPU and IO die
>> +Required properties:
>> + - compatible : "hisilicon,hisi-djtag-v2"
> Same here.
>
>> + - reg : Register address and size
>> + - scl-id : The Super Cluster ID for CPU or IO die
>> +
>> +Example 1: Djtag for CPU die
>> +
>> + /* for Hisilicon HiP05 djtag for CPU Die */
>> + djtag0: djtag@80010000 {
>> + compatible = "hisilicon,hisi-djtag-v1";
>> + reg = <0x0 0x80010000 0x0 0x10000>;
>> + scl-id = <0x02>;
>> +
>> + /* All connecting components will appear as child nodes */
>> + };
>> +
>> +Example 2: Djtag for IO die
>> +
>> + /* for Hisilicon HiP05 djtag for IO Die */
>> + djtag1: djtag@d0000000 {
>> + compatible = "hisilicon,hisi-djtag-v1";
>> + reg = <0x0 0xd0000000 0x0 0x10000>;
>> + scl-id = <0x01>;
>> +
>> + /* All connecting components will appear as child nodes */
>> + };
>> --
>> 2.1.4
>>

\
 
 \ /
  Last update: 2016-12-23 11:19    [W:0.052 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site