lkml.org 
[lkml]   [2016]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9] mtd: spi-nor: Add support for S3AN spi-nor devices
From
Date
Le 13/12/2016 à 08:53, Marek Vasut a écrit :
> On 12/02/2016 12:31 PM, Ricardo Ribalda Delgado wrote:
>> Xilinx Spartan-3AN FPGAs contain an In-System Flash where they keep
>> their configuration data and (optionally) some user data.
>>
>> The protocol of this flash follows most of the spi-nor standard. With
>> the following differences:
>>
>> - Page size might not be a power of two.
>> - The address calculation (default addressing mode).
>> - The spi nor commands used.
>>
>> Protocol is described on Xilinx User Guide UG333
>>
>> Reviewed-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
>> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
>> Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
>> Cc: Brian Norris <computersforpeace@gmail.com>
>> Cc: Marek Vasut <marek.vasut@gmail.com>
>
> [...]
>
>> +static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor)
>> +{
>> + int ret;
>> + u8 val;
>> +
>> + ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
>> + if (ret < 0) {
>> + dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
>> + return ret;
>> + }
>> +
>> + nor->erase_opcode = SPINOR_OP_XSE;
>> + nor->program_opcode = SPINOR_OP_XPP;
>> + nor->read_opcode = SPINOR_OP_READ;
>> + nor->flags |= SNOR_F_NO_OP_CHIP_ERASE ;
>
> NIT: You have an extra space before ; ^
>
>> +
>> + /*
>> + * This flashes have a page size of 264 or 528 bytes (known as
>> + * Default addressing mode). It can be changed to a more standard
>> + * Power of two mode where the page size is 256/512. This comes
>> + * with a price: there is 3% less of space, the data is corrupted
>> + * and the page size cannot be changed back to default addressing
>> + * mode.
>> + *
>> + * The current addressing mode can be read from the XRDSR register
>> + * and should not be changed, because is a destructive operation.
>> + */
>> + if (val & XSR_PAGESIZE) {
>> + /* Flash in Power of 2 mode */
>> + nor->page_size = (nor->page_size == 264) ? 256 : 512;
>> + nor->mtd.writebufsize = nor->page_size;
>> + nor->mtd.size = 8 * nor->page_size * info->n_sectors;
>> + nor->mtd.erasesize = 8 * nor->page_size;
>> + } else {
>> + /* Flash in Default addressing mode */
>> + nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT;
>> + }
>> +
>> + return 0;
>> +}
>
> Looks great otherwise:
> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
>
Applied to git://github.com/spi-nor/linux.git

I've removed the additional SPACE before ';' as reported by Marek.

Thanks!

\
 
 \ /
  Last update: 2016-12-13 18:48    [W:0.066 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site