lkml.org 
[lkml]   [2016]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 3/3] iio: adc: add support for Allwinner SoCs ADC
On Tue, Dec 13, 2016 at 03:33:32PM +0100, Quentin Schulz wrote:
> The Allwinner SoCs all have an ADC that can also act as a touchscreen
> controller and a thermal sensor. This patch adds the ADC driver which is
> based on the MFD for the same SoCs ADC.
>
> This also registers the thermal adc channel in the iio map array so
> iio_hwmon could use it without modifying the Device Tree. This registers
> the driver in the thermal framework.
>
> The thermal sensor requires the IP to be in touchscreen mode to return
> correct values. Therefore, if the user is continuously reading the ADC
> channel(s), the thermal framework in which the thermal sensor is
> registered will switch the IP in touchscreen mode to get a temperature
> value and requires a delay of 100ms (because of the mode switching),
> then the ADC will switch back to ADC mode and requires also a delay of
> 100ms. If the ADC readings are critical to user and the SoC temperature
> is not, this driver is capable of not registering the thermal sensor in
> the thermal framework and thus, "quicken" the ADC readings.
>
> This driver probes on three different platform_device_id to take into
> account slight differences (registers bit and temperature computation)
> between Allwinner SoCs ADCs.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

I already gave my Acked-by apparently, but I'll say it again :)

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-12-13 16:42    [W:0.099 / U:1.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site