lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V12 1/1] usb:serial: Add Fintek F81532/534 driver
From
Date
Hi Johan,

Johan Hovold 於 2016/11/24 下午 11:04 寫道:
> On Mon, Nov 14, 2016 at 01:37:59PM +0800, Ji-Ze Hong (Peter Hong) wrote:
>> This driver is for Fintek F81532/F81534 USB to Serial Ports IC.

>> + }
>> +
>> + if (size_bulk_out != F81534_WRITE_BUFFER_SIZE ||
>> + size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) {
>> + dev_err(dev, "%s: endpoints packet size not matched\n",
>> + __func__);
>
> Similarly: "unsupported endpoint max packet size\n".
>
> But just to be clear: You do want to bail out if connected at full
> speed? You could also ask usb-serial core to allocate large enough
> buffers (e.g. by setting the bulk_out_size driver field) and the host
> controller will handle partitioning.

Yes, this product cannot run on USB full-speed currently due to the
bulk-out endpoint design. It need use 512 bytes packet size to transmit
4 ports TX data, but USB Full-speed only provide 64 byte. The F81534
will treat the all bulk-out data as port 0 although the host will spilt
512byte to 8 x 64bytes packets.

--
With Best Regards,
Peter Hong

\
 
 \ /
  Last update: 2016-11-29 03:34    [W:0.044 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site