lkml.org 
[lkml]   [2016]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V3 2/2] pinctrl: tegra: Add driver to configure voltage and power of io pads
On Wed, Nov 23, 2016 at 12:42 PM, Laxman Dewangan <ldewangan@nvidia.com> wrote:

> Here, we need the regulator handle which can support the other regulator
> APIs.
>
> In some of platforms, we do not use some of the io-pins and on this case, we
> do not connect the IO rail supply for these pins. So this is like a hardware
> optional.
>
> If the IO pins are used then it need to have the proper regulator handle.
> Missing regulator handle on DT will be like that IO pads are not used.

OK I buy that argument, unless Mark (Brown) has comments.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2016-11-24 15:13    [W:2.274 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site