lkml.org 
[lkml]   [2016]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] backlight: pwm_bl: Check the pwm state for initial backlight power state
On Tue, Nov 01, 2016 at 02:59:33PM +0200, Peter Ujfalusi wrote:
> If the pwm is not enabled the backlight initially should not be enabled
> either if we have booted with DT and there is a phandle pointing to the
> backlight node.
>
> The patch extends the checks to decide if we should keep the backlight off
> initially.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> drivers/video/backlight/pwm_bl.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index 4b07da278b4f..f680f7b033b2 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -215,6 +215,10 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
> if (!regulator_is_enabled(pb->power_supply))
> return FB_BLANK_POWERDOWN;
>
> + /* The pwm is disabled, keep it like this */
> + if (!pwm_is_enabled(pb->pwm))
> + return FB_BLANK_POWERDOWN;
> +
> return FB_BLANK_UNBLANK;
> }

I prefer "PWM" instead of "pwm" in prose (comments and commit message)
because it's an abbreviation.

Otherwise this looks correct:

Reviewed-by: Thierry Reding <treding@nvidia.com>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-11-21 09:13    [W:0.123 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site