lkml.org 
[lkml]   [2016]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 -next] Input: gpio_keys: set input direction explicitly for gpio keys
Date
Commit 700a38b27eef ("Input: gpio_keys - switch to using generic device
properties") switched to use generic device properties for GPIO keys and
commit 5feeca3c1e39 ("Input: gpio_keys - add support for GPIO descriptors")
switched from legacy GPIO numbers to GPIO descriptors.

Previously devm_gpio_request_one was explicitly passed GPIOF_DIR_IN flag
to set the GPIO direction as input. However devm_get_gpiod_from_child
doesn't have such provisions and hence fwnode_get_named_gpiod can't set
it as input.

This breaks few platforms with the following error:
" gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
unable to lock HW IRQ <n> for IRQ
genirq: Failed to request resources for POWER (irq <x>) on irqchip
gpio_keys: Unable to claim irq <x>; error -22
gpio-keys: probe failed with error -22 "

This patch fixes the issue by setting input direction explicitly for
gpio input keys. It also remove the existing GPIOF_DIR_IN flag setting
for the legacy gpios and merges into single gpiod_direction_input call.

Fixes: 700a38b27eef ("Input: gpio_keys - switch to using generic device properties")
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/input/keyboard/gpio_keys.c | 10 +++++++++-
drivers/input/keyboard/gpio_keys_polled.c | 10 +++++++++-
2 files changed, 18 insertions(+), 2 deletions(-)

v2->v3:
- Added error handling and error message

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 5576f2ae0b71..ed38a05b3039 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -502,7 +502,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
* Legacy GPIO number, so request the GPIO here and
* convert it to descriptor.
*/
- unsigned flags = GPIOF_IN;
+ unsigned flags = 0;

if (button->active_low)
flags |= GPIOF_ACTIVE_LOW;
@@ -521,6 +521,14 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
}

if (bdata->gpiod) {
+ /* set the GPIO direction to input */
+ error = gpiod_direction_input(bdata->gpiod);
+ if (error) {
+ dev_err(dev, "Failed to configure GPIO %d as input, error %d\n",
+ desc_to_gpio(bdata->gpiod), error);
+ return error;
+ }
+
if (button->debounce_interval) {
error = gpiod_set_debounce(bdata->gpiod,
button->debounce_interval * 1000);
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index 72b350315d43..4bd8a015cf5f 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -319,7 +319,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
* Legacy GPIO number so request the GPIO here and
* convert it to descriptor.
*/
- unsigned flags = GPIOF_IN;
+ unsigned flags = 0;

if (button->active_low)
flags |= GPIOF_ACTIVE_LOW;
@@ -342,6 +342,14 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
}
}

+ /* set the GPIO direction to input */
+ error = gpiod_direction_input(bdata->gpiod);
+ if (error) {
+ dev_err(dev, "Failed to configure GPIO %d as input, error %d\n",
+ desc_to_gpio(bdata->gpiod), error);
+ return error;
+ }
+
bdata->last_state = -1;
bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
pdata->poll_interval);
--
2.7.4
\
 
 \ /
  Last update: 2016-11-16 19:39    [W:0.432 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site